Roc-2015 for Single Stage RO Plant Simple RO Controller

ROC-2015 for Single Stage RO Plant Simple RO controllerRelated Products                      RO System                                                        FRP Tank                                               Control ValveProduct DescriptionThe controller is of an automatic operation management controller designed for small-scale first-class anti-osmosis water preparation system, which can realize automatic operation of anti- osmosis devices only by adding few electric elements at periphery. It has digital input (DI) ports in five states and four output control ports, and it is a small-scale economical controller.   Product ParametersSupply voltageAC 220V ±10% 50/60HZPower consumption≤2WEnvironmental conditionstemperature:0~50ºC; Humidity:≤85%RHLoad capacity of output contacts5A/ 250V AC (resistive load)Dimensions48*96*80mm (height*width*depth)Hole size44*92mm (height*width)FS:High-pressure and low-pressure flushing selectionHP:Access terminal for overpressure detection of Booster (high pressure) pump (normally closed, disconnecting in case of overpressure, and short out COM at top right corner when not using)NW:Detection on low level of original water tank or low pressure of pipeline (use liquid level switch or pressure switch and installation of sampling point)LP:Access terminal of switch for detecting security filter pressure at back of low-pressure pump(Contact normally open, and closed when up to the pressure as required)LC: Input terminal of switch for detecting level of pure water tank (normally closed, disconnecting in case of the water full and closed meeting low liquid level)EC:Whether the control system operates for access terminal for external control(control by remote and panel switch)COM: Common port for upper acquisition terminalAC220V: Firewire end for 220V power supply (220V AC powers on); Zero line for power grid COM: Common point for control relay IV: Output contact for controlling on and off of water feeding solenoid valve (normally open and passive)FV: Control contact for on and off of RO flushing solenoid valve (normally open and passive)LM: Contact for controlling start/stop of booster pump(normally open and passive)HM: Contact for controlling start/stop of low-pressure water pump (normally open and passive)All the above control ports are terminals of dry contact of relay(without power distribution), sharing COM common terminal.Detailed PhotosContact Us Company Profile/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1