Customizable Automatic Painting Gun Powder Coating Spray Booth / Spray Paint Booth for Booth for Wheel Rim#

Production descriptionEnvironmental Protection Space-Saving Layouts Powder Coating Line / Powder Poat Booth For Wheel Rim#Chain system  Adopt QXT200/30KG, double tension and drive, frequency converter control. Equips with C type hanger and oil connection plate.Pre-treatment system Pre-treatment adopts suitable silane environmental protection processre-treatment adopts suitable silane environmental protection processCuring oven Curing oven adopts full bridge type to save the energy. Internal curing oven adopts 0.8mm galvanized steel plate, external curing oven adopts 0.8mm color plate.Detailed imagesThe whole line includess pre-treatment, electrophoresis, curing oven, chain system, electrical control system etcComplete production line process and parameterItemNameTime (min)Temp (°C)Method1Loading  Manual2Pure water clean 11Room tempSpray3Pure water direct injection Room tempSpray4Silane1.5Room tempSpray5Pure water clean 21Room tempSpray6Pure water clean 30.75Room tempSpray7Pure water direct injection Room tempSpray8Drip2.5Room temp 9Electrophoresis328-32Sink10UF notch spray Room tempSpray11UF1 spray0.75Room tempNotch spray12UF2 spray0.75Room tempSpray13UF direct injection Room tempSpray14Pure water clean 40.75Room tempSpray15Pure water direct injection Room tempSpray16Drip10Room temp 17Electrophoresis curing25-26160-170Hot air recycle18Cooling18 Nature19Unloading   Manual  Detailed specification1 This equipment consists of pre-treatment, electrophoresis, curing drying tunnel, catenary system, electrical control system, etc.2. Pre-processing and post-processing.   Pre-treatment adopts environmentally friendly process suitable for silane. The pre-treatment adopts a full-spray process, which can effectively form a film. The shed and the liquid storage tank are all made of stainless steel; the spray side plate is a double-layer plate. To ensure no leakage, insulation cotton is added between the two layers of the heating section, and the outer plate is a plug-in type. This structure has the functions of beautiful appearance, noise reduction and saving.       The spraying pipeline adopts main stainless steel pipe and branch pipe PP pipe, and the quick connection is connected with the main pipe, and no live joint is used, which can be easily disassembled and maintained;       The side wall of the spray storage tank is made of double-layer stainless steel, and it is covered with rock wool board for thermal insulation. The cover structure of the spray heating tank mouth adopts a water seal mechanism to prevent steam from overflowing from the tank cover.     The top of the spraying shed body in the heating section adopts an air extraction mechanism, equipped with an exhaust pipe and an exhaust fan, and the remaining sections are sealed with a brush bar, which solves the phenomenon of steam overflow.     For the convenience of maintenance, A3 overall maintenance platform is provided.     The water washing tank adopts a countercurrent complementary method to save water resources; pure water equipment is equipped with a concentrated liquid water tank and a water pump, pumped to water washing 1, to fully utilize water resources.    The spray pump uses a submerged pump.    All connection lines are easy to remove and maintain. 3..Electrophoresis     Electrophoresis is equipped with electrophoretic auxiliary equipment: rectifier power and conductive devices, ultrafiltration system, anode system, main circulation system, and transfer tank system.   3.1 Rectified power supply and conductive device The rectified power supply uses a single voltage. The conductive device adopts double-ear double-contact + steel bar, which is charged into the groove. A conductive hanger is arranged in the primary hanger, and a conductive copper bar is arranged in the electrophoresis tank. 3.2 Ultrafiltration system It adopts roll-type ultrafiltration membrane and is imported. In order to save the power of the main circulating water pump, the ultrafiltration water pump participates in the circulation and is controlled separately. And equipped with filters. 3.3 Heat exchange system Plate heat exchanger is used for heat exchange. Equipped with chiller and heating function. 3.4 Transfer tank system. In order to facilitate the electrophoresis cleaning, an electrophoresis transfer tank is provided, and a stirring system is arranged in the tank. The transfer (electrophoretic stirring) and ultrafiltration pumps are Shanghai Ruichi double shaft sealed water pumps. 3.5 anode system The anode uses a tubular anode system. Equipped with a total flow meter and ammeter. 3.6 Hydrating In electrophoresis post-processing, countercurrent complementary method is adopted. 4. Introduction of conveying method The catenary is QXT200 / 30KG. It adopts double driving and double tensioning, and adopts inverter control. Equipped with C-type hanger and oil receiving plate, reducing the pollution to the workpiece and suitable for the production of