China Manufacturers Wholesale Container Paint Spray Booth

  China Manufacturers Wholesale Container Paint Spray Booth Container Spray Booth Specification                           Telescopic room inside size7100/6654 (L)*4000(W)*2400(H)mm                                     The outer diameter of the entire container10800(L)* 2438(W)*3200(H)mm(Close size)The outer diameter of the entire container10800(L)* 4202(W)*3200(H)mm(Expand Size)Main doorFront door with 2-leaf, 50mm thick Rock wool sandwich wall panels, size 2200×2400mm, (with large glass door), 6mm thick square tempered glass observation window, glass size 1150x550mm.                                                                                   Safety door2 pieces, one for each side wall, 50mm thick rock Wool sandwich wall panel, with pressure lock and observation windowEquipment access door2 units, 50mm thick Rock wool sandwich insulation wall panel, size  2200Wx2500Hmm with pressure locks and cooling holesOuter frameSquare pipe, I-beam, channel steel, bending parts, corrugated board and other welding machinesAir intake chamberFull-down draft, the top is a full filter cotton structure, and the part near the cabinet is made with a mesh structure trawlBasementTwo rows of standard floor grilles (galvanized), three rows of checkered plates (painted)The bottom is sealed, and the platform bracket is welded to form2000×900(L×W)3. Two pieces slope (with carrying ring), 2000×900 (L×W) paintingThe ground sealing plate of the back room is a panel checkered plate with heat preservationSupply and exhaustsystem1.The cabinet board is filled with rock wool for heat preservation, white, replacement the filter cotton and the normal inspection surface is movable board (the top frame has a movable board on one side)2. Air supply: turbo fan DDF-7.5KW, direct drive ABB motor3. Exhaust air: TAE-450-7.5KW, belt drive ABB motor4,Generator group position: Rear side Inlet and exhaust ductEquipped with transfer ducts, 2 additional sections of air inlet duct + rain cap; 4 sections of exhaust duct + gravity damperFiltering system1. Top filter: flame retardant 600G.2. Ground filter: glass fiber cotton filter (green).Exhaust filter: simple M-type filter cotton, no filter bag, no environmental protectionTelescopic partManual push-pull telescopic track structure (2 people flexibly push and pull easily)Heating system304 stainless steel heat exchanger, equipped with Riello G20 diesel burner heating,20000Kcal, equipped with 4 smoke pipes and rainhatLighting systemWith side light at two side wall, light box inside. 8 group led lights,each sets with 4 pcs tubeElectric control systemThe star-delta start of the intake and exhaust fan motor is equipped with spray paint, constant temperature spray paint, paint baking system, lighting switch, time setting, emergency stop switch, fault alarm, accumulative time, with pressure gauge, etc.Power supply380V,3phase,50HZTotal power16.5KW     RemarkOptional gas heating FS20 burnerColorOutside Blue and inside White ,Other color need to discussOptional 1Heat: Gas Burner FS20,or othersOptional 2Other Nonstandard Power( Different from 380V,3phase,50HZ)Optioanl 3Light Box Outside(For Australia/NZ Market)Optioanl 4AU/NZ control panel standard     /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1