Tire Factory Giant Tyre OTR Tire E-4 37.00-57 24.00-35 24.00-49 30.00-51 33.00-51 36.00-51 50/80-57 53/80-63 33.25-29 E-3 29.5-29 33.25-35 37.5-39 59/80r63

  SIZEPRTREAD PATTERNTREAD DEPTH(mm)ORDERSIZEPRTREAD PATTERNTREAD DEPTH(mm)ORDER24.00R49★★E-458 33.25-2932E-463.5 27.00R49★★E-460 38 36.00R51★★E-477 29.5-2928E-340 40.00R57★★E-485 34 33.00R51★★E-475 40 27.00R49★★E-463 33.25-3532E-342.5 37.00R57★★E-481 38 40.00R57★★E-485 37.5-3952E-346.5 18.00-3332E-454 35/65-3342L-5S100 36 45/65-4558L-5S116 21.00-3532E-445 35/65-3342L-5 100 36 45/65-4558L-5116 27.00-4948E-463 45/65-3958L-5116 54 40/65-3936L-5106 31/90-4954E-472 41.25/70-3942L-5115 40.00-5768E-482 50/80-5768L-497 76 52/80-5768L-497 37.00-5768E-482 50/80-5768L-497 76 52/80-5768L-497 24.00-3536E-457 17.5-2516L-326 42 20 24.00-4942E-458 20.5-2516L-329 48 20 30.00-5146E-470 23.5-2516L-332 52 20 33.00-5150E-475 26.5-2516L-335 58 20 36.00-5150E-482 29.5-2516L-338 58 20 50/80-5768E-485 37.25-3542L-348 53/80-6378E-487 15.5-2512L-224 ♠  Warranty limitations: This limited warranty is applicable to the original purchaser.Any OTR radial tires, no matter how well manufactured, may fall in service of otherwise become unserviceable due to conditions beyond th control of the manufactures. This limited wattanty is under no circumstances a representation that a tyre failure cannot occur.The limited warranty gives you specific rights and you may also have other rights which may vary from jurisdiction to jurisdiction. To the extent that the provisions of any applicable such term or terms shall be accordingly replaced, eliminated, amended to extended, as the case may be, in accordance with such legisiation.♠  Measure of remaining tread depth:1. Vernier caliper(or professional caliper) is used, when mesuring, avoiding the wearing mark. Any the vernier caliper(or professional caliper) must be vertical to the bottom of groove.2. The position of measure: Groove depth of middle line on the tread or depth of the leading groove nearest to the tread center.3. Avoid the strengthening veins and position of wearing mark when measuring.4. Calculation of tread depth: measure the depth of four equal indexes on the tread cirle, and the average value of the four data is regarded as the remaining tread depth.♠  What is not covered by this warranty?The following are not covered by this policy:1. Tires purchased more than 5 years prior to presentation. Without proof of the B/L date, tires manufactured more than 5 years prior to presentation are not covered.2. Tyres sold as a blemish(B grade tyres: the first letter of brand is moved).3. Tires for which an alternate warranty/guarantee has been negotiated.The tread wear and damage will not covered by the limited warranty influenced by the following conditions:1. Damaged resulting from misuse, improper mounting, misapplication, use if non-approved rims, improper inflation, overloading, running flat, misalignment of imbalanced of wheels/rims, defective brakes of shock absorbers, abuse, willful damage, oil, chemical action, fire or other externally generated heat, use of studs, water or other material entrapped inside the tire, vehicle damage or road hazards (such as rock cuts, punctures, cut separations, impacts, flex breaks).2. Claims for irregular wear or rapid tread wearout are not vovered by this limited warranty.    /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1