Third Stop Light Reverse / Rear View Camera for Ford Transit

Brake Light Backup / Rear View / Reverse / Stop Car / Van / RV Camera for Ford Transit (2014-2018) in CCD : Chip2399Image TypeSony CCDBuilt-in Len1.7mmEffective Pixel1280(H) * 960(V)Horizontal Resolution1000 TVLTV SystemNTSC / PALLens Angle170 degreeIP RatingIP68KVibration Rate10GB.L.CBack light compensation ( Auto ) White BalanceAuto white balance (Auto)Minimum Lumination0 Lux ( LED ON )S/N Ratio>70dBElectronic Shutter1/60-1/100,000 SecPower ConsumptionDC 12V(+/-10%) , 24V availablePower Consumption∠3WOperation Temperature"-30ºC-+70ºC RH95% MaxStorage Temperature"-40ºC-+80ºC RH95% MaxCable4 Pin, 10m cable with adaptorConnector4P aviation connector AudiowithoutFAQ on Product :1. Which model is this camera suitable for ?      All models, it is universal 2. What connector can the camera made ?     4 Pin aviation connector, RCA connector and BNC connector, and can be customized according to customers' requirement     4 Pin aviation connector is default , also match a cable for 4 Pin to RCA for dual use3. Can this camera be made in 12- 24V?     Default voltage is 12V, also can be made in 12-24V4. What chip does this camera use?     Normally Sony CCD 600 TVL and PC1058, default CMOS PC10585. Can this camera be built-in MIC?     Please contact us for this requirement 6. Can this camera be made in guideline ?     In CCD, it can be made in guideline or without guideline, no guideline default      In CMOS, it can be guideline on / off optional 7. Is this camera in PAL system or in NTSC system ? Mirror image or non-mirror image ?     Default is NTSC system, mirror image      But PAL system , non-mirror image also available 8. Is this camera waterproof ?    We use high quality waterproof materials, combined with special waterproof technology, each unit is tested 100%    Triple protection ensures the super IP68 waterproof performance and durability of the products    Make sure the camera not get water , not get fog after a period of use     9. What's the lead time ?     Normally 2- 5 days How to Choose High Quality Camera ? 1. Waterproof performance:     Due to the working environment, the camera is exposed to the wind and rain all the year round, needs high waterproof rate      Cameras that are not waterproof are usually flooded after being used for a period of time, and finally can't be used at all2. Interface :     Aviation head is recommended .  Aviation head can be tightened, no need to worry loosening     Power supply and signal line are integrated, no bad contact3. The shell must withstand high temperature :     Especially in summer, the temperature of inside and outside vehicle is very high4. Chip :     Need to be CCD or high-quality CMOS     Because CCD and high-quality CMOS have more true vivid color and clear image,     Other low-end CMOS may have color distortion, which becomes black and white after a period of use5. Lens:     Generally there are plastic lens and glass lens, they are very different      Plastic lens is very cheap, but the imaging effect is obviously inferior to glass     So glass lens is much better and good option   6. Aging :    Aging is a very important step to ensure the quality of camera     Most cameras that are sold very cheap in the market have not been aged,    so there will be many bad products especially after a large number of shipmentsAdvantages of our High Quality Cameras:  1. 4 layers PCB 2. Strong anti-interference capacity 3. Wires in all copper 4. Lens is 3G1P 5. Good color and anti-interference 6. Good waterproof 7. Before market and after market acceptable 8. Camera lens active alignment 9. Professional camera lab 10. Dust-free assembly workroom 11. Dust-free, constant tempreture and humidity warehouse  Our Hardware:  1. 2 automatic SMT production lines 2. Camera lens active alignment 3. Professional camera lab 4. Professional parking sensor lab 5. Professional reliability lab 6. Professional ESD lab 7. Dust-free assembly workroom 8. Dust-free and constant tempreture and humidity warehouse Our Software:  1. Being supplied OEM orders to car factories such as Benz, Toyota, Suzuki, JAC  2. CE, FCC, RoHS, EMARK, NCC Certificated 3. ERP High Efficiency System 4. 15 years exporting experience 5. Reply your inquiry wthin 12 hours 7. All raw materials, PCBA and finished prodducts must be tested at least 3 times before shipment ( including IQC, QC, IPQC, QA )  More FAQ: 1. Do you have MOQ ?     Depends on , mostly 50-500 sets / model     Third brake light bakcup camera : 10-20 / model2. Could you send me product sample before I place an order?     Yes, sample / trial order is acceptable 3. What is your warranty term ?     12 months normally, for good customers, 24 months acceptable 4. What's your packing ?     Neutral white box, neutral color box, clear bag optional, carton size depends on inner box5. What is shipping way ?     DHL, UPS, EMS, FEDEX, Sea / Air , DDP 6. What is the lead time ?     3-7 working days for sample order, 30-45 working days for bulk order 7. W