650ml Professional Rubberized Undercoating Aerosol Spray Paint Rust Proof and Water Proof

Stone Chip and Underbody Protector Undercoating Aerosol   Product nameRubberized Undercoating SprayVolume500ml , 650ml & 1LNet Weight  (g)350gGross Weight (g)458gColorBlack/Light GreySpray Rate≥99%Surface Drying≤10 minutesHard Dry Time60 minutesDelivery Leadtime25-30 days depending on quantityPrivate labelacceptable   Product Description:This product offers lasting and flexible protection from stone chipping and corrosion. It's  based on a combination of rubber and resin with a roar-preventing effect. Clean and easy use inside and outside. It also has good performance on sound insulating and noise reducing, widely applied in the auto manufacturing and car care industries. Also deadens droning noises from the engine bay, door shells, luggage compartments and other hollow sections.Features:· Prevent rust· Deadens sound· Waterproof, elastic· Will not crackDirections:1.Clean the base area thoroughly, which should be clean dry and free of dust, oil, grease and wax, etc;2. Cover the other parts tightly;3. Spend two minutes to shake the can evenly, open the lid, remover the seal and insert the special designed spray gun onto the mouth, collect the 0.6-0.8MPa compressed air, finally spray onto the surface at a distance of 25cm;4. To avoid the flow line or sagging, three times spraying are needed. After the first time spray, flatten and fill the cracks and caves with metal seal-glue. Every interval should be not less than 15 minutes, best noise deaden effect need more than 1.5mm thickness.5. Before drying, petrol is allowed to clean.Precautions: 1. Inflammable, spray in a ventilated area, keep far from heat and fire.2. Work under personal protection with glasses, mast and gloves. If uncomfortable when touch the product, please go to a doctor.3.If it's the first time to use this product ,it's better to confirm the best operating methods. OUR SERVICE 1.Aerosol contract filling2.OEM & ODM offered3.Design and submission of samples for the products and/or packing material.4.Manufacture, fill, pack and QA checkout on finished products5.All tests required for export6.Custom declaration and related matters for export7.Offer different formula, fragrance or design as per customer's requirement8.Manufacturing according to customer's samples and specification    /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1