Infitech Electric Heating Automobile Maintenance Equipment Spray Paint Booth for Auto/Car

Auto Spray Booth Paint Booth Paint Spray Booth Painting Room   1.FEATURESDATE OF COMPLETION:SEPTEMBER,2021INTERNAL DIMENSION:8000X4000X2800MMMANUAL ENTRANCE DOOR, 4 WING ENTRY DOORS ("2+2"STRUCTURE), CONTAINING FRAME, WITH SAFETY GLASS OBSERVATION WINDOW;WITH 7.5KW INTAKE/EXHAUST FANS, 28000CMH, EMPTY LOADED AIRSPEED 0.27M/S;WITH INVERTER AND TOUCH SCREEN CONTROL SYSTEM.2.Design   3.SPECIFICATIONSITEMSSPECIFICATIONSModelIT-SUPER-701 Car Spray Painting BoothDesign standardBS EN 13355: 2004+A1:2009BS EN 60204: 2006+A1:2009Internal dimensions 8000 X 4000 X 2800mm (L X W X H)External dimensions9570 X 4110 X 3460mm (L X W X H)AirflowFull DowndraftPlenum (height)600mmExtraction350mm basement sunken in the groundExtraction area28m2Grids carrying capacity900kg/wheelEntrance door3400x2700mm (WxH), manual entry door, 1 setDivider door6000x2400mm (WxH), electric plate roll-up door, 1 setService door800x2000mm(WxH), 1 setWalls60mm rock wool wallsCeiling lights (LED)8 sets, each 6 X 18W, 864W totalSidewall lights (LED)4 sets, each 2 X 18W, 144W totalBrightness>1,000LUXFiltersBag filter, high efficiency ceiling filter, floor filter, exhaust filterIntake/Exhaust unitDirect-type turbine fan, 2x7.5KW, SIEMENS motorAir volume28,000m3/hEmpty loaded air speed0.25m/sHeats120kw heat Maximum working temperature 80ºCControlsCE standard control boxInverterInverter controlStack light Yes.Heat recuperator OptionRated power20KW   4.DETAILSBOOTH STRUCTURE (SPRAY BOOTH)350mm high metal base sunken in the groundWall panels vertically installed600mm plenumOPTIONWe can customize the basement to specially meet your workshop requirements.4-LEAF ENTRY DOOR & ELECTRIC DIVIDER DOOR (SPRAY BOOTH)Entry door with big safety glass windows and panic latchLED lamps, IP55 protection grade lighting fixturesAIR MAKEUP UNIT (SPRAY BOOTH)2*7.5kw fan unit, SIEMENS motor28,000m3/h air volume, 0.28m/s empty loaded air speedDamper (for painting and baking phase)232kw heat exchanger, RIELLO RS5D gas burnerHEAT RECUPERATORWorking principleThe device is an additional device for spray booths used in cold areas, which is for recycling waste heat.The temperature of the exhaust gases from heating painting is higher than that of outdoor fresh air. Fresh air drawn in by the intake fan is 0ºC or below 0ºC. In cold areas where the temperature is below 0ºC, the heating system needs to work more frequently, which results in more energy consumption. However, when using heat of the waste gases to heat the fresh air, it does not require additional energy, which greatly saves energy and improves the energy efficiency. It is an excellent green and environmental heating device.   ItemsParameters detected at the lower temperature endParameters detected at the higher temperature endAirflow28,000m3/h28,000m3/hAir inlet temperature-5ºC23ºCAir inlet humidity5010Air outlet temperature9.4ºC7.1ºCAir outlet humidity1728Pressure loss511Pa436PaTemperature efficiency51%57%Internal air speed8.07m/s8.07m/sCondensate water volume0kg/hExchange energy148,380wCAR PREP STATION- 600mm plenum- Flat ceiling lighting fixtures- Intake and exhaust fan unit, 2*5.5kw- Extraction Option A: extraction through exhaust plenum chambers at the back Option B: extraction through base with grids in the ground- Electrical and tool cabinets on the rear wall- Electric soft curtain door in the front and as dividerELECTRIC SOFT CURTAIN DOORFAQQ: How long is the production lead time?A: 20 days from advance payment received for standard spray booths.For non-standard projects, we will have to check the schedule case by case.   Q: How long is the warranty?A: 2 year warranty for main components, not including consumables.   Q: Where is your factory located?A: Baiyun, Guangzhou, 15 minutes' drive from the airport. Welcome to visit us at the factory.   Q: With the heat recuperator, can I put the machinery at the top of the spray booth?A: Yes, it is still okay.   Q: For the heat recuperator, does the fresh air and exhaust air will contact with each other?A: According to the design, the air is forced to pass through the heat exchanger core, two air streams (i.e. fresh air and exhaust air) never come into direct contact, avoid the transfer of any smell and moisture.   Q: How long can the spray booth serve?A: If the booth can be maintained regularly and properly, the common service time of the spray booth is 7-10 years.   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1