Stainless Steel Wedge Wire Filter Screen Nozzle

We are a manufacturer of filter strainers in china.Wedge wire single / dual velocity strainers, manufactured uniquely in stainless steel, are successfully used in mixed beds, ion exchangers and regenerators of condensate polishing system. Advanced design ensures extended service runs, effective flushing of resins, short regeneration time, effective separation of mixed beds and highly efficient operation at low cost.The combination of high open area and a non-plugging slot design makes these strainer applications popular. Typical filter strainers are fabricated with a blind cap on one end and washer fixed with a threaded stem on the other end. Filter strainer can be made with many different slot sizes and body configurations to suit specific flows or media retention.Construction of water nozzlesThe wedge wire element in a nozzle is a slot tube. Nozzles are closed on one side and have a threaded fitting on the other. The flow is always out to in. Standard nozzles are 50 mm in diameter, all having a flow-out-to-in (FOTI) filtration.Principle of  water nozzlesNozzles can be used for liquid/solid or gas/solid separation, or media retention (sand, catalyst, resin, ….).The nozzles are mounted on a support plate (as shown in figure). The dimensions and the distribution of the nozzles on the support plate can be altered to obtain an optimized flow distribution.Application of water nozzlesAbove mentioned designs are used widely in down-flow reactors for liquid/solid or gas/solid separation. The liquid or gas can flow through the nozzles while the solids are retained in the vessel by the nozzles.Advantages of water Nozzles:Large open areanon-cloggingConsistent slot widthnon loss of resinSmooth surfacelong using lifeTechinical Information: Specification (wedge wire):Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 4.00Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00Specification (support rod):Width(mm): 2.30 3.00 3.30 3.70Height(mm): 2.70 3.60 4.70 5.60 6.30Round: From 2.50mm to 6.0mmNote: other specifications available as per requestSlot size0.10, 0.15, 0.20, 0.25, 0.30... 6.00mm also achieved upon request.Material:galvanized low carton (LCG), stainless steel (304/304L,316/316L, etc.)Lengthup to 6 meters.Diameterfrom 25mm to 1200mm.End connectionPlain beveled ends, flanged or threaded couplings/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1