Factory Direct Sale Wiring Harness for Automotive

Factory direct sale Wiring Harness for AutomotiveSPECIFICATIONCABLE NAMEEV CableCABLE SPEC2C×80mm2+1C×25mm2+2C×4mm2+(3C×0.75mm2)(P2)+(7C×0.75mm2)RoHS  CompliantItemA : 2C×80mm2B : 1C×25mm2C : 1C×4mm2D:(3C×0.75mm2)(P2)E:(7C×0.75mm2)CONDUCTORMaterialBared copper strandedSize2580/0.20 ±0.008mm798/0.20 ±0.008mm224/0.15±0.008mm +10/1#Tinsel+1000D Kevlar40/0.15±0.008mm+ 10/0.19mmTinsel+200DKevlar40/0.15±0.008mm+ 10/0.19mmTinsel+200D KevlarO.D.(Ref.)12.40±0.25mm7.00±0.20mm  2.70±0.15mm1.40±0.10mm1.40±0.10mmINSULATIONMaterialThermoplastic(EF2585,85±3A)Min. average thickness1.60mm1.20mm1.00mm0.50mm0.50mmMin.thickness at any point1.34mm0.98mm0.80mm0.35mm0.35mmO.D.15.60±0.40mm9.60±0.30mm4.70±0.20mm2.50±0.10mm2.50±0.10mmCABLING-1Filler/CottonCottonMaterial/AL-mylar(facing out)Non-wovenBRAIDMaterial/Tinned  copper/Size/0.12mm,≥60%/In-JACKETMaterial/TPETPEMin. average thickness/0.60mm0.60mmMin.thickness at any point/0.42mm0.42mmO.D./7.20±0.25mm9.70±0.25mmCABLINGFillerStrengthed  PP  rope MaterialNon-woven(≥25% overlapping)Assembly2C×80mm2+1C×25mm2+2C×4mm2+(3C×0.75mm2)(P2)+(7C×0.75mm2)JACKETMaterialTPUMin. average thickness2.80mmMin.thickness at any point 2.28mmO.D.38.00+0.6/-1.00mm ELECTRICAL CHARACTERISTICSPHYSICAL PROPERTIESRated voltage:DC 1000VTensile strength:≥20MPaHigh temperature pressure test:≤50%      Rated temperature:Jacket  -40~90ºCElongation:≥300%Heat shock test:No  crack                                                        Insulation  -40~125ºCAged condition:110±1ºC×168hCompatibility test:GB/T 33594Max. conductor resistance(20ºC):Percent of original tensile strength:≤±30%Crush resistance test:GB/T 33594A:0.242Ω/km  B:0.78Ω/km  C:4.95Ω/km   D&E:26Ω/kmPercent of original elongation:≤±30%Curved around the test:GB/T 33594Insulation  Voltage withstand(Core A&B,10m):Flame  test:GB/T 18380.12-2008Min.  Bend  radius:6*ODAC 2.5kV/5min,leakage current ≤5mAArtificial weathering test:GB/T 33594Abrasion resistance:≥2000timesCompleted cable  Voltage withstand(Core A  to A&B,10m):Low-temperature impact test :-40ºC×16H,No  crackResistance against chemicals:GB/T 33594AC 3.5kV/15min,leakage current ≤5mAChemical stress acid: N-Oxal-acid alkaline solution, N-sodium hydroxide solution:GB/T 33594Min. Insulation resistance(20ºC, Core A  to  A&B):500MΩ.kmVehicle rolling:Requirements and test methods should be consistent with GB/T 20234.1-2015 7.21StructureNO.conductor                 mm2insulution20ºC conductor resistance             (Ω/KM)conductor                 mm2Structure(N/mm) Conductor DIA(mm)Conductor Thickness (mm)MATERIALinsulution OD          (mm)EV-YJ1.548/0.201.60 copper 0.6silicone2.90±0.15≤12.7EV-YJ2.580/0.202.06 copper 0.7silicone3.50±0.15≤7.60EV-YJ4 128/0.202.62 copper 0.8silicone4.30±0.15≤4.71EV-YJ6 196/0.203.50 copper 0.8silicone5.10±0.20≤3.14EV-YJ10 322/0.204.50 copper 1.00 silicone6.70±0.20≤1.82EV-YJ16 513/0.205.70 copper 1.10 silicone8.00±0.30≤1.16EV-YJ25 798/0.207.10 copper 1.3silicone9.80±0.30≤0.743EV-YJ35 1121/0.208.50 copper 1.3silicone11.40±0.30≤0.527EV-YJ50 1596/0.2010.10 copper 1.50 silicone13.50±0.30≤0.368EV-YJ70 2242/0.2012.10 copper 1.50 silicone15.50±0.40≤0.259EV-YJ95 3034/0.2014.10 copper 1.50 silicone17.50±0.50≤0.196   Conductor : Flexible Bare annealed copper wire Insulation:SiliconeChoice of Black, Orange, Red or Yellow Blue jacket, single & double insulated.SQ MM sizes (European style) :4 sq mm to 240 sq mmAWG sizes (North American style) :0AWG-10AWG,Wide temperature range: -60°C to 200°C     2,Low viscosity appearanceConductor : Flexible Bare annealed copper wire Insulation:SiliconeChoice of Black, Orange, Red or Yellow Blue jacket, single & double insulated.SQ MM sizes (European style) :4 sq mm to 240 sq mmAWG sizes (North American style) :0AWG-10AWG,Wide temperature range: -60°C to 200°C Company Profile:Wire and cable manufacturer Linke Cable Technology Co., Ltd is a leading cable supplier in China. In the past over 10 years, Linke Cable has been focusing on R&D, production and marketing of wire and cable. Linke provide various cables&custom cable solutions for all over the world. We are specialized in EV charging cable, medical cable, silicone cable, spring cable, braided cable, towlobe cable, UL wire, automotive cable, etc.At Linke cable, we believe there's a better way to bring better cables to market. We use an engineer-to-engineer approach to develop better cables for customers and  improve the quality of one's life.Our certification: SO9001 and ISO13485,TS16949 CNR- Appliance Wiring Material,Extruded PVC Insulated Single,rated 105ºC,1000V,ClassI,GroupA,B,or AB, FT1 and/or FT2.Extruded PVC Non-integral Jacketed Cable, rated 105"C, 1000V, Class I, Class or Class I/Il, Group A, B, or AB, FT1 and/or FT2. Extruded TPU Non-integral Jacketed Cable, rated 80"C, 300V, Class I, Class or Class I/Il, Group A, B, or AB, FT1 and/or FT2  FAQ 1. Are you a manufacturer or trading company?We are a professional manufacturer. We can control your order from the first begining to the last. Welcome to v