Irrigation Water Solenoid Valve with Hydraulic Control on/off 12V 24V AC DC Plastic 3 Inch Valve

Solenoid Valve (motor type) Advantage: This Solenoid can be fitted with the common controllers for automatic irrigation system Actuator motor designed for converting electric to hydraulic command which is essential part for Hydraulic controlling valve Three version AC (DC) and DC Latching available,  AC and DC version is 2 in 1 NC (Normally Closed) and NO (Normally Open) two modes available for selection Designed with diaphragmin inside which makes controlling main part separate from water passageways for long service life Width water passageways designed for short reaction of controlling valve and anti-clogging Manual controlling knob for CLOSE-AUTO-OPEN operation 3-way hydraulic base can be fitting for the Hydraulic controlling with 3 position 2 way Very low energy consumption for long distance control with long wire Technical Data: AC (DC) version: Voltage 24V (15-30V), Current Inrush 90mA, Holding 75mA DC Latching version: Voltage 12-40V, Pulse width: 80-500ms Pressure range: 0-10bar (0-140 psi) Max. ambient temperature: 60ºC (140ºF) Max. fluid temperature: 60ºC (140ºF) Filtration: Min. 80 mesh Hydraulic ports connecting: 1/8" BSP With 100cm Wires DC Latching version has red (positive) wire and black (negative) wire   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1