Custom Plastic Extrusion LED Light Diffuser for Tube Lamp Linear Strip Square Cover Made of Milky White Black Polycarbonate PC

custom plastic extrusion led light diffuser for tube lamp linear strip square cover made of milky white black polycarbonate pchttps://forever-plastics.en.made-in-china.com/product-list-1.html LEXAN LUX9132C Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non- brominated flame retardant PC has an UL-94 V0 rating at 1.5 mm, high flow capability and is UV stabilized        providing additional weathering capability. LEXAN LUX9132C is available in diffusion colors.Product DescriptionLEXAN LUX9132C Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non- brominated flame retardant PC has an UL-94 V0 rating at 1.5 mm, high flow capability and is UV stabilized        providing additional weathering capability. LEXAN LUX9132C is available in diffusion colors.GeneralForm Resin PelletsFeature F1Non-Chlorinated  Excellent ProcessabilityNon-Brominated & Non- Chlorinated Flame  Retardant  DiffusiveUL Yellow Card                        E207780-101256996Uses  Lighting Diffusers  Electrical PhysicalNominal ValueTest MethodSpecific Gravity1.19ASTM D792Mold Shrinkage, Flow(3.2 mm)0.55 - 0.75 %SABIC MethodMold Shrinkage, XFlow(3.2 mm)0.6 - 0.8 %SABIC MethodMelt Flow Rate[MFR](300 °C;1.2 kgf)18 g/10minASTM D1238Density1.2 g/cm³ISO 1183Water Absorption(23 °C;saturated)0.13 %ISO 62-1Moisture Absorption(50% RH;23 °C)0.11 %ISO 62Melt Volume Rate, MVR(1.2 kg;MVR at 300 °C)17 cm³/10 minISO 1133MechanicalNominal ValueTest MethodIzod Impact, Unnotched23 °C-30 °CNB J/mNB J/mASTM D4812Izod Impact, Notched23 °C-30 °C100 J/m85 J/mASTM D256Instrumented Dart Impact, Total Energy(23 °C)65 JASTM D3763Unnotched Izod Impact Strengthunnotched;80*10*3;23 °C 0unnotched;80*10*3;-30 °C 0NB kJ/m²NB kJ/m²ISO 180/1U  Notched Izod Impact Strengthnotched;80*10*3;23 °C 0notched;80*10*3;-30 °C 010 kJ/m²9 kJ/m²ISO 180/1ACharpy Impact, V-Notched23 °C;Edgew;80*10*3;sp=62mm 0-30 °C;Edgew;80*10*3;sp=62mm 010 kJ/m²9 kJ/m²ISO 179 1eACharpy Impact, Unnotched23 °C;Edgew;80*10*3;sp=62mm 0-30 °C;Edgew;80*10*3;sp=62mm 0NB kJ/m²NB kJ/m²ISO 179 1eUTensile Stress, Yield50 mm/min;Type I50 mm/min67 MPa63 MPaASTM D638ISO 527Tensile Stress, Break50 mm/min;Type I50 mm/min54 MPa57 MPaASTM D638ISO 527Tensile Strain, Yield50 mm/min;Type I50 mm/min6 %6 %ASTM D638ISO 527Tensile Strain, Break50 mm/min;Type I50 mm/min80 %73 %ASTM D638ISO 527Tensile Modulus50 mm/min1 mm/min2400 MPa2300 MPaASTM D638ISO 527Flexural Stress, Yield1.3 mm/min;50 mm;span2 mm/min103 MPa96 MPaASTM D790ISO 178Flexural Modulus1.3 mm/min;50 mm;span2 mm/min2400 MPa2400 MPaASTM D790ISO 178  ThermalNominal ValueTest MethodUL Recognized≥ 1.5 mm≥ 0.4 mmV-0V-2UL 94Glow Wire Ignition Temperature [GWIT]3 mm1.5 mm850 °C850 °CIEC 60695-2-13Glow Wire Flammability Index3 mm1.5 mm960 °C960 °CIEC 60695-2-12UV-light, water exposure/immersion1UL 746CVicat Softening TemperatureRate B/50Rate B/50Rate B/120136 °C139 °C140 °CASTM D1525 ISO 306ISO 306Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm3.2 mm;1.82 MPa130 °C120 °CASTM D648CTE, Flow-40 - 40 °C23°C to 80°C6.8E-05 1/°C7.7e-05 1/°CASTM E831ISO 11359-2CTE, XFlow-40 - 40 °C23°C to 80°C7.0E-05 1/°C8.0e-05 1/°CASTM E831ISO 11359-2Ball Pressure Test(125°C +/- 2°C)PassIEC 60695-10-2HDT/Be(Edgew;120*10*4;sp=100mm; 0.45 Mpa)131 °CISO 75/BeHdt/Ae(1.8 MPa;Edgew;120*10*4;sp=100mm)121 °CISO 75/AeRelative Temp Index, Elec130 °CUL 746BRelative Temp Index, Mechanical with Impact120 °CUL 746BRelative Temp Index, Mechanical without Impact130 °CUL 746B  ElectricalNominal ValueTest MethodComparative Tracking Index, CTIPLC 3UL 746AHigh Amp Arc Ignition, HAI(≥ 0.4 mm)PLC 1UL 746AHot-wire Ignition, HWI≥ 1.5 mm≥ 0.4 mmPLC 0PLC 3UL 746ADielectric Constant, Dk(1100000000 Hz)2.78ASTM ES 7-83Dissipation Factor, Df(1100000000 Hz)5.6E-03ASTM ES 7-83Processing Nominal ValueDrying Temperature 120 °CDrying Time 3 - 4 hrsDrying Time, Cumulative 48 hrsMaximum Moisture Content 0.02 %Melt Temperature 280 - 305 °CNozzle Temperature 275 - 300 °CFront, Zone 3 Temperature 280 - 305 °CMiddle, Zone 2 Temperature 270 - 295 °CRear, Zone 1 Temperature 260 - 280 °CMold Temperature 70 - 95 °CBack Pressure 0.3 - 0.7 MPaScrew Speed 40 - 70 rpmShot To Cylinder Size 40 - 60 %Vent Depth 0.025 - 0.076 mm                                                                                                                     Forever Co.,LtdWith almost 20 years in the modified engineering plastics,Forever Plastics is a high-tech manufacture integrating R&D, production and sales of high-performance resin or polymer ,including PC,PP,PA6,PA66, PBT,PET, PC/ABS, PC/PBT, PC/PET alloy compounds,TPE,TPU, PE for rotomolding with the property of the flame retardant, glass fiber reinforced, high glossy, UV resistance.....with the annual output value of USD 65 million in 2021. Our customers are Osram,Cree,,Siemens,etc. for years in the electrical&electronics components, Automotive parts, House appliance,LED lights.....          /* January 22, 2024 19:08:37