Telescopic Sliding Door Operators for 6 Moving Wings

Automatic Door Operator Sliding Door Operator with Brush Motor automatic door with Dunker Motor RECOR STM400Feature 1...Function 95% similar as KABA and works with original KABA 2. Brush Motor or Dunker Motor 99.5W, powerful enough to bear 2X160KG gates. 3. Easy install since the Drive system has been installed before leavine the factory 4. Germany Dunkermotor, CE approved 5. Three Levels programe, the User can adjust the open width(20-90%), Open direction and etc Standard Configuration 1. Minidrive Unit 2. Transformer 3. Motor 4. Decoder 5. Basic control module 6. Track 7. Carrier 8. Return Pully 9. Service cover holder 10. End stop 11. Door bracket 12. Belt connection 13. Belt tensioning device Opetional Parts Motion Sensor Lock latch Battery Beam safety photocell Specification ES200 Easy Weight of gate Single/Bi-part1X200KG/2X120KG Width of gate Single/Bi-part900-6100MM Master Controller32 digital microprocessor Brush motor/Dunker motor99.5W 60VDC 2A IP50 Opening speed300-700mm/s Closeing speed300-650mm/s Max open strength150N Hold Open Time/Lock0-10S/30s Height of the rail8CM Deepth of the rail16CM Power SupplyAC110V-250V 50/60HZ Temp15 C to +70 C Power Consumptionaround 100W Protection degree of ElectronicIP23 Function Key switch Off Automatic Permanent Open Partial Exit only Program Switch Adjust all the parameters Error showing -------------------------------------------------------------------------------------------------------------------------------------------- Additional Low noise desigh (