Coloured Bond Shingle Classical Stone Coated Steel Roofing Tile Seven Wave Terracotta Roof Sheet Panels 1340mm*420mm

Product NameColor Stone coated Metal roof tileBrand NameGUANG SHENG JIAWidth size1050mmThickness of metal0.28mm-0.5mmMain materialGalvalumeSurface materialColor stone sandWeight 2.8-3.9kg/pcLength sizeCustomizeStyeMilanoWarrantyMore than 5 yearsFire ProtectionExcellentOriginal placeTianjin, ChinaApplicable slope20° - 80°Use life50 yearsProduct Description    Colored stone metal roof tile is composed of aluminum- zinc steel sheet( as the substrate), fingerprint resistant coating, coloredsand, acrylic resin, acrylic ester.1)The galvanized steel sheet is made of 55% aluminum, 43.4% zinc and 1.6% silicon by hot dipping. Its processability andcoating performance are basically the same as those of galvanized steel sheet. The service life is 2-6 times that of ordinarygalvanized sheet.2) The galvanized surface is anti-fingerprint coating, which protects the galvanized layer. At the same time, the anti-fingerprintcoating can make the galvanized steel plate and colored sand better bonded. The color is divided into colorless transparent andlight green.3) Sintered colored sand is the decorative layer and base protection layer of metal tiles. It is made of basalt particles with acertain particle size through high-tech coloring process and high-temperature sintering. With more than ten colors, it is resistant toultraviolet radiation and can reduce the noise caused by rain to metal tiles.4) Acrylate is the key material for bonding the steel plate and colored sand, and also serves as a protective layer on the surface of the sand to prevent the leakage of rainwater in details and prolong the life of the color of the sand.   Details Images  All of shapes we can manufacture     Company Profile0000The advantages    1) Light weight--Metal tile is one of the lighter roof tile materials, 5-6kg per square meter, equivalent to one-sixth of    traditional cement tiles.2) Firmness - Compared with traditional tiles, metal tiles adopt advanced waterproof, windproof and nail-fixed designs,    the fit between tiles is closer, and the connection between tiles and roofs is tighter and stronger, making the metal    tiles The roof system has a strong ability to resist heavy rain, heavy snow and strong wind.3) Good fire resistance - colored stone metal tile is a new type of roof material combined with galvanized steel plate    and colored stone. It has strong fire resistance and can reduce fire losses.4) Anti-hail-Colored stone metal tiles are made of metal materials, strong enough to resist general hail damage.5) Anti-earthquake - the light colored stone metal tile greatly reduces the weight of the building, and because it is fixed   to the roof structure with nails, it has strong resistance to earthquakes and can prevent the danger of tiles falling off.6) Resistance to heavy rain--Because the metal tile is fastened and installed, there is no need to worry about rain   leakage on the roof, and the sand on the surface can greatly reduce the noise of raindrops.7) Wind resistance - the design and construction technology of colored stone metal tiles, horizontal lap and buckle   installation, can resist cyclones and typhoons. Coastal areas only need to increase the number of nails to resist typhoons.8) Weather resistance ------ multi-layer protection treatment on the surface of galvanized steel plate, no water leakage    within 35 years.9) Heat insulation ------Because a cavity is formed behind the tile and the sloping roof system is conducive to the air    circulation of the roof, it can effectively insulate the heat.10) Freeze-thaw resistance - in extremely cold regions, it will not freeze and crack. Soak in clean water at 15-25°C for     about 24 hours, freeze in air at -20±3°C for about 2 hours, then dissolve in water at 20±3°C for about 1 hour, repeat     the cycle  200 times, and the observation results are: metal tiles There is no peeling between layers.     The accessoriesBuilding showAbout construction:1. The construction environment temperature of colored stone metal tiles should be 5 ºC ~ 35 ºC. When it is lower   than 5 ºC, strengthened protective measures should be taken.2. Construction personnel should wear rubber-soled soft shoes during construction, and try to avoid or reduce    stepping on the laid colored stone metal tile surface. For parts that are easy to be stepped on, such as around    the dormer window, soft materials should be used as temporary protection. so as not to damage the product.3. The pipes, equipment or embedded parts passing through the roof waterproof layer are installed before the laying    of colored stone metal tiles.4. After the installation of the colored stone metal tile is completed, it is very important to ensure that the surface of    the colored stone metal tile is not damaged during the installation process, so the following points should be noted:    4.1 Wear gloves when handling colored stone metal tile products on site, and tie them firmly when lifting colored    stone metal tiles. They should