12mm 15mm 16mm 18mm 20mm 22mm Perforated Wall Cladding Panel Wall Panel Decoration 3D Fence Panel

 >>Edge Glued Panel DescriptionSpecies:-Radiata pine- Beech natural (not steamed)- Beech (steamed)- Beech red heart (rustic)- European Oak- European Maple- Ash tree- Cherry natural or steamed- Black locust (acacia) steamed- WhitebeamTypes and dimensions- Finger jointed panels (from finger-jointed hardwood staves, same lamella's width on a board)- Solid wood panels (made from strips, approx. random width 40-100mm)Finger jointed panels:- Thickness: 18/19/20, 26/27, 38/40, 43 mm or customized- Lengths: up to 4600mm- Widths: up to 1300 mmGlued panels with solid staves:- Thickness: 18/19/20, 26/27, 38/40, 45mm or customized- Lengths: Furniture boards up to 2500mm, stair treads and raisers 900-1800mm- Widths: up to 1300mmGradingA/B grade - Furniture grade- Side A (face side): clean, no red heart (beech wood), free of knots, and discolorations, consistent structure, and color, oak without sapwood- Side B (bottom side): no red heart, free of knots, natural stains, oak with some sapwood.B/B grade- Side A: small strips of red heart allowed (beech wood), free of knots, natural discolorations, sapwood strips allowed for oak- Side B (bottom side): red heart allowed, small pin knots, natural stains, sapwood allowed for oak, putting allowed.B/C grade- Side A: small strips of red heart allowed (beech wood), free of knots, natural discolorations, sapwood allowed for oak- Side B (bottom side): red heart allowed, small knots, natural stains, sapwood allowed for oak, putting allowedC/C grade (red heart panels)- Side A: beech naturally colored, sound red heart decoratively wanted, discolorations allowed, knots and mineral strike.- Side B (bottom side): beech naturally colored, sound red heart decoratively wanted, discolorations allowed, knots and mineral strikes, putting allowed.Edge glued lumber panels are an important component of many high quality furniture designs.Edged glued panels may be used for exposed furniture parts (such as doors), face glued intonsquares for turning or used as core material for hardwood plywood. In any case,it is imperativenthat the panels be manufactured with strong glue bonds, closed joints, smooth surfaces, and be free of cup and warp. Product Name Solid Wood Edge Glued Board Model Number CFPC-EGP-001 Material pine  Mainly Material  paulownia, fir, pine, poplar, birch, spruce Color Natural Wooden Color or Bleached  Grade AA, AB, BB, BC Density 300-350KGS/CBM Moisture Content 6%-12% Thickness 3-55mm Size 1220*2440 or as customized Delivery time shipped in 15-25 days after payment Payment term TT/LC Certificate  ISO9001, FSC, BV Feature stable and solid , natural twxture , green and evirmment protection, excellent hygrosscopicity adn are permeability  Packing details 1) Inner Packing:Pallet is wrapped with a 0.2 plastic paper. 2)Outer Packing:Pallet is covered with plywood or carton and then steel tapes for strength. >>Edge Glued Panel Quality ControlTo insure panels of consistent good quality, it is important that the manufacturer carefully monitor several crucial aspects of the edge gluing process. When edge gluing difficult species, it is especially crucial that manufacturersfollow strict quality control practices. The purpose of this report is to discuss proper manufacturing techniquesnecessary for quality panels.Proper manufacturing techniques are essential for quality edge glued panels. To insure proper techniques are followed, a structured quality control program must be in place,the most important manufacturing concerns related to achieving quality panels and offers suggestions for designing a quality control program. The manufacturer must take this information and design a program which best fits their process needs and concerns. Equally important is that the manufacturer monitor and maintain their manufacturing equipment. Broken clamps, worn bearings, missing machine parts, and poorly adjusted machines arecommon causes of poorly manufactured panels. The cost of neglecting equipment is high. Likewise, manufacturers should seek advice from their adhesivesuppliers and equipment manufacturers. Many companies offer good technical support and educational materials as a service to customers. Much can be learned from the experiences of those who deal with similar problems on a daily basis.1. Quality edge glued panels cannot be manufactured from improperly manufactured lumber.The lumber must be dried to a moisture content appropriate for the environment of its intended end-use (6-8% ). 2.Machining of Panel Components Panel components must be machined properly to achieve a quality panel. Machined parts must be straight,have parallel and square edges, and surfaces of good quality. 3.It is also important that the edges are machined square. When edges are not square, a gap occurs along one edge of the glue line. When this gap is on the face of the panel (in view of the operator), the operator will often apply extra pressure to force the components together.4.It also import