Honeycomb Decorative Wall Panel Shower Panel Stainless Steel Composite Panel

Basic Info.Model NO.SS-006 DULLSurface FinishingCoatingPanel Thickness4mmAluminum Thickness0.4mmFunctionFireproofing, Anti-static, Anti-Bacterial, Mould-proofUsageExternal Wall, Curtain Wall, Interior, AdvertisingCertificationCE, ASTM, ISOStainless Steel Thickness0.4mmTrademarkBOLLIYATransport PackageWooden PalletSpecification1200*2400*4*0.5MMOriginGuangdong FoshanHS Code72193400Product Description Product Name: Stainless steel composite panel , stainless steel honeycomb panel, decorative stainless steel wall panel, stainless steel shower panel,Introduction: Metal Composite Panel is sandwich panel that is composed of 2 metal sheets (aluminum, copper, zinc or stainless steel) bonded to a thermal plastic core (or FR core).Characteristic of metal composite panels:CharacteristicsSuper flatnessHigh panel rigidityLight weightedEconomic costVarious colorsEasy fabrication & InstallationGood Anti-UV propertyGood impact resistanceSpecification of BOLLIYA Metal Composite PaneMaterialStainless SteelFinish TypesMirror, Brushed, Dull, EmbossedPanel Thickness2mm, 3mm, 4mm, 5mm, 6mm upto 15mmStainless Steel Skin Thickness0.3mm ,0.4mm, 0.5mmGrade of stainless steel304, 316, 220MPanel Width1000mm, 1200mm, 1500mmPanel Length2440mm, 4880mm, 5000mm, 5800mmCoreLDPE core, Mineral Filled FR coreBOLLIYA factory at a glance:Year Established1997Production Lines1 high-speed coating line (runs at 30meter/minute)2 ACP lamination line (runs at 6meter/minute)Production Capacity8000sq.m of 4mm panel a day (2 containers)Management SystemsISO9001 / ISO14001 / ISO18001Product QualityComplies with CE, ASTM, EN, BS normsProduction RangeAluminum Composite PanelCopper Composite PanelStainless Steel Composite PanelTitanium-zinc Composite PanelAluminum Honeycomb PanelSandwich PanelsHow do we guarantee our product quality?We have 3 strict quality control procedures to ensure our product quality.Step 1: We choose top quality raw materialsPVDF paints: PPG and BeckersAluminum Coil: ChalcoCopper Coil: AurubisTitanium Zinc Coil: RheinzinkStainless Steel Coil: NSSC, POSCO, Bao SteelStep 2: High-tech and high precision coating line and lamination line, strict quality inspection during color coating process, lamination process and packing processCoating process: Aluminum thickness, color deviation, gloss rate, coating thickness, T-bend, pencil hardness, paint adhesion etc, were fully inspected according to AAMA620 norms.Lamination process: Peeling Strength, panel thickness, panel width & length, diagonal, panel surface are fully inspected accordingly to ACP industry standard.Packing and container loading process: Visual quality re-checkStep 3: Third party tests. We cooperate with SGS, TUV, Intertek to conduct quality tests on our product. Below is test results done on our product (done by SGS):NoTest itemTest methodTest conditionResult1Coating           thicknessASTM D7091-05-27.0µm2GlossASTM D523-0860° geometry273Pencil             hardnessASTM D3363                -05(2011)Pencil: Mitsubishi®scratch hardness: 2H          (see note 1)4Bend         resistanceASTM D3363                -05(2011)                method A-No cracking at the minimum mandrel diameter(3mm)5AdhesionASTM D7091-05e2    method BTape: Permacel 99           Space: 1mmClassification: 5B                (see note 2)6Impact      resistanceASTM D2794                -93(2010)Diameter of the punch:    12.7mm                           Impact model: intrusionImpact failure end point: 1.3kg·m7Abrasion   resistanceASTM D968-          05(2010) method ALitres of abrasive: 76.0L   Coating thickness: 0.99milAbrasion resistance:     76.8L/mil8Water      resistanceASTM D870-09Immersion, 99ºC,2hAppearance:                            No visual change9Dirty resistanceASTM D2064                -91(2008)Cheesecloth: 40×40mm            4 intact layers                        No. 8 rubber stopper            lead: 500g                   condition: 60ºC,1hNumberical value:10             (see note 3)10Alkali         resistanceASTM D1308-     02(2007)               clause 7.210 drops of 1%(m/m)NaOH  Spot test, 16h                       (see note 4)Appearance:                            No visual change11Acid resistance10 drops of 1%(m/m)H2SO4  Spot test, 16h                       (see note 4)Appearance:                            No visual change12Oil resistanceEdible oilAppearance:                            No visual change13Solvent          resistanceASTM D5402                -06(2011)                method ASolvent: MEK                       Rub rate: 1cycle/s            Number of double rubs:25cycles                    (see note 4)Appearance:                            No visual change14Color retentionAAMA 2605-2005      7.1Take a random point on the sample as color standardE*ab=0.20                         (See note 5)15Adhesion       reverse impact   1/6" crosshatchWith reference to  ASTM D3359-09e2 method B and      client's requirementDiameter pf the punch: 12.7mm impact model: extrusion    Space: 1/6inch