13mm Galvanized Steel Composite for Truck Trailer Box Transportation

Basic Info.Model NO.SS-006 DullMaterialGalvanized SteelApplicationDecorationSurface TreatmentDullGalvanized Steel Panel Thickness6mmGalvanized Steel Thickness0.5mmCore MaterialFr CoreTypeGalvanized Steel Composite PanelCertificationTvu Ce, ISO9001, SGSTrademarkBOLLIYATransport PackageWooden PalletSpecificationCE, SGS, INTERTECK, TUV, BS476 478OriginGuangdong FoshanHS Code76061191Product Description Product Name: stainless steel panel, stainless steel wall panels, steel composite panel, steel facade panel, steel moulding building, steel panelIntroduction: Metal Composite Panel is sandwich panel that is composed of 2 metal sheets (aluminum, copper, zinc or stainless steel) bonded to a thermal plastic core (or FR core).Characteristic of metal composite panels:CharacteristicsSuper flatnessHigh panel rigidityLight weightedEconomic costVarious colorsEasy fabrication & InstallationGood Anti-UV propertyGood impact resistanceSpecification of BOLLIYA Metal Composite Panels:CoatingPVDF Kynar500 / FEVE / PECoating Thickness:PVDF & FEVE >25micronsPE>15micronsPanel Thickness2mm, 3mm, 4mm, 5mm, 6mm upto 15mmAluminum Skin Thickness0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mmAlloy1100, 3003, 3005, 3105, 5005Panel Width1220mm, 1250mm, 1500mm, 1575mm, 1750mmPanel Length2440mm, 4880mm, 5000mm, 5800mmCoreLDPE core, Mineral Filled FR coreBOLLIYA factory at a glance:Year Established1997Production Lines1 high-speed coating line (runs at 30meter/minute)2 ACP lamination line (runs at 6meter/minute)Production Capacity8000sq.m of 4mm panel a day (2 containers)Management SystemsISO9001 / ISO14001 / ISO18001Product QualityComplies with CE, ASTM, EN, BS normsProduction RangeAluminum Composite PanelCopper Composite PanelStainless Steel Composite PanelTitanium-zinc Composite PanelAluminum Honeycomb PanelSandwich PanelsHow do we guarantee our product quality?We have 3 strict quality control procedures to ensure our product quality.Step 1: We choose top quality raw materialsPVDF paints: PPG and BeckersAluminum Coil: ChalcoCopper Coil: AurubisTitanium Zinc Coil: RheinzinkStainless Steel Coil: NSSC, POSCO, Bao SteelStep 2: Quality inspection during color coating process, lamination process and packing processCoating process: Aluminium thickness, color deviation, gloss rate, coating thickness, T-bend, pencil hardness, paint adhesion etc, were fully inspected according to AAMA620 norms.Lamination process: Peeling Strength, panel thickness, panel width & length, diagonal, panel surface are fully inspected accordingly to ACP industry standard.Packing and container loading process: Visual quality re-checkStep 3: Third party tests. We cooperate with SGS, TUV, Intertek to conduct quality tests on our product. Below is test results done on our product (done by SGS):NoTest itemTest methodTest conditionResult1Coating           thicknessASTM D7091-05-27.0µm2GlossASTM D523-0860° geometry273Pencil             hardnessASTM D3363                -05(2011)Pencil: Mitsubishi®scratch hardness: 2H          (see note 1)4Bend         resistanceASTM D3363                -05(2011)                method A-No cracking at the minimum mandrel diameter(3mm)5AdhesionASTM D7091-05e2    method BTape: Permacel 99           Space: 1mmClassification: 5B                (see note 2)6Impact      resistanceASTM D2794                -93(2010)Diameter of the punch:    12.7mm                           Impact model: intrusionImpact failure end point: 1.3kg·m7Abrasion   resistanceASTM D968-          05(2010) method ALitres of abrasive: 76.0L   Coating thickness: 0.99milAbrasion resistance:     76.8L/mil8Water      resistanceASTM D870-09Immersion, 99ºC,2hAppearance:                            No visual change9Dirty resistanceASTM D2064                -91(2008)Cheesecloth: 40×40mm            4 intact layers                        No. 8 rubber stopper            lead: 500g                   condition: 60ºC,1hNumberical value:10             (see note 3)10Alkali         resistanceASTM D1308-     02(2007)               clause 7.210 drops of 1%(m/m)NaOH  Spot test, 16h                       (see note 4)Appearance:                            No visual change11Acid resistance10 drops of 1%(m/m)H2SO4  Spot test, 16h                       (see note 4)Appearance:                            No visual change12Oil resistanceEdible oilAppearance:                            No visual change13Solvent          resistanceASTM D5402                -06(2011)                method ASolvent: MEK                       Rub rate: 1cycle/s            Number of double rubs:25cycles                    (see note 4)Appearance:                            No visual change14Color retentionAAMA 2605-2005      7.1Take a random point on the sample as color standardE*ab=0.20                         (See note 5)15Adhesion       reverse impact   1/6" crosshatchWith reference to  ASTM D3359-09e2 method B and      client's requirementDiameter pf the punch: 12.7mm impact model: extrusion    Space: 1/6inch                   Tape: Pe