AR Fiberglass Mesh for GFRC/GRC Reinforcement ZrO2 16.7%

AR/ARG GLASS FIBRE MESHHUIERJIE AR GLASSFIBRE MESH is used by Manual laying or Mechanical molding to reinforce the areas which need mechanical strength to prevent crack.Application:HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: standard is 150g/M2. It is produced by chopping Huierjie AR-Roving into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systems. Packaging & Storage:MAT Packing details: 100M2 /Roll /ctn,16ctns/pallet,20pallets/1*20'FCL. 32000M2 . MESH Packing details: 50M2 /Roll, 36rolls/pallet, 20pallets/1*20'FCL. 36000M2.Huierjie AR Glassfibre mat & mesh pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15ºC- 35ºC & relative humidity between 35%- 65%. If stored below 15ºC, it isadvisable to hold in workshop for 24 hours to prevent condensation before use.Note: Huierjie AR Glassfibre mesh are manufactured in compliance with EN15422:2008, BSEN13496:2002 and ETAG 004. Packaging & Shipping MESH Packing details: 50M2 /Roll, 36rolls/pallet, 20pallets/1*20'FCL. 36000M2.Huierjie AR Glassfibre mat & mesh pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15- 35degree & relative humidity between 35%- 65%. If stored below 1degree, it is advisable to hold in workshop for 24 hours to prevent condensation before use. FAQ-Summaries, Draw up and Edit by Mr. Li qiangfeng on 12th. Sep. 20151.       Are you a trading company or manufacturing factory?We are a direct alkaline resistant glass fiber manufacturer with rich import & export experience.2.      What kind of ARG fiber products can you provide?We are a professional factory with advanced technology to produce only AR glassfibre for GRC application and decorative concrete reinforcement. The mainly products include ZrO2 16.7% ARG Spray Roving, ZrO2 16.7% AR chopped strand, ZrO2 16.7% ARG mesh & ZrO2 16.7% ARG mat.3.      What is the application and usage of your ARG Fiber?It is used to reinforce for cement or concrete. That is Glassfibre Reinforced Concrete or Cement. (Called as GRC or GFRC). It is not used for plastic or resin reinforcement.4.    What are the advantages of your company?Been appointed as a cooperative factory to research and develop the alkaline resistant glassfibre with China Building material Academy in 1970's and make it industrial producing. That is to say, we are the earliest factory to produce ARG fiber in China.45 years accumulated ARG fiber producing experience;Skilled technical team and continues technology innovation,Technical cooperation with domestic and overseas university to research and develop the coating sizing,Raw materials strictly inspection, each producing process strict QC testing, final product testing on daily producing,which assure the good product quality, stable product quality.Full members of China GRCA, Int'l GRCA and Germany GRCA (FVF accosiation)5.      Which quality standards are your product comply with?Domestic standard JC/T572-2002 (AR glassfibre for GRC application)Int'l Standard: BSEN15422:2008; ASTM C 1666/C 1666/M-07 and  specifications recommended by Int'l GRCA.6.      What is your quality difference on comparing to Cem-fil and NEG?It is proved to have a similar quality and application performance to Cem-fil.(We have test report from Qatar Customer). It is also tested to have a similar quality and performance to NEG at Sheffield University,UK. Reports are available. Indeed, we have difference from NEG,while can compete with Cem-fil.7.      Do you send ARG fiber to the 3rd party lab for quality verifying?Yes. We send ARG Roving to the 3rdfamous lab for quality verify each year.They are Fugro Lab in HK.China National Fiberglass product quality supervision and testing centerChina Building Material science and research academy.Test result are favorable.8.      How many years experience do you have on export business?We begin to do export business in 2003 and our export business has been booming since Mr. Li and Mr. Wang come in year 2008.9.      What is your MOQ order?There is no limitation on MOQ order, while to save purchase cost, it is advised to import 1-2 pallets. We are confident on quality because they have been used in both domestic and overseas famous GRC factory for many years.(Like Nanjing Beilida Group,Beijing Baogui Stone, China Shantai group etc.)10.  What are your payment terms?   T/T, LC and D/P are acceptable.11.  What is your loading port?  Wuhan port, Shanghai port.12.  What is your leading time for a 20 tons order? Delivery from factory in 2 weeks on receipt of your confirmed order or advance payment.13.  Where has your ARG Fiber been exported to?They have been exporting to UK. Germany,F