5%OFF High Quality Rope 304 Stainless Steel Wire Rope

Stainless steel wire ropeStainless steel wire rope: with many or many strands of fine steel wire twisted into flexible rope, wire rope is made up of multi-layer wire twist strands, and then the rope core as the center, by a certain number of strands twisted into a spiral rope. In material handling machinery, for lifting, traction, tension and load bearing purposes. Wire rope has high strength, light weight, stable work, not easy to suddenly break the whole root, reliable work.structureSteel wireThe wire rope plays the role of bearing load, and its performance is mainly determined by the wire rope. Steel wire is stainless steel, carbon steel or alloy steel through cold drawing or cold rolling round (or profiled) wire material, with high strength and toughness, and according to the use of different environmental conditions on the wire surface treatment. rope coreIt is used to increase the elasticity and toughness of steel wire rope, lubricate steel wire, reduce friction and improve service life. Commonly used rope core organic fiber (such as hemp, cotton), synthetic fiber, asbestos core (high temperature conditions) or soft metal and other materials.The material:316L 304 304L, 310S, 201, 202, 302, 303 and so onspecifications:Product specifications: 1*7-2.1mm 1*7 2mm-3mm 1*7 2mm-4mm and so onStructure :1*2, 1*3, 1*7, 7*7, 3*7, 1*19, 7*1, 6*12, 7*7, 7*19, 17*39The rope diameter: 1 mm - 40.0 mmThe stainless steel line of same material pledges, stainless steel rod, stainless steel tube, stainless steel plate, stainless steel wire rope wants expensive obviously, among them the most expensive is 7*7.Features :A. High dimensional accuracy, up to ±0.01mm; B. Excellent surface quality and good brightness; C. Strong corrosion resistance, high tensile strength and fatigue strength; D. Stable chemical composition, pure steel, low inclusion content;Stainless steel applicationMost use requirements are to preserve the original appearance of the building for a long time. When determining the type of stainless steel to choose, the main consideration is the required aesthetic standards, the location of the corrosive atmosphere and the cleaning system to be used. However, other applications increasingly seek only structural integrity or impermeability. For example, roofs and side walls of industrial buildings. In these applications, the owner's construction cost may be more important than aesthetics, and the surface may not be very clean. 304 stainless steel works well in dry indoor environment. However, in rural and urban areas to maintain their appearance outdoors, they need to be cleaned frequently. In heavily polluted industrial and coastal areas, the surface can be very dirty and even rust. However, in order to achieve aesthetic effect in outdoor environment, it is necessary to use nickel stainless steel. Therefore, 304 stainless steel is widely used in curtain wall, side wall, roof and other building purposes, but in the serious erosion of industrial or Marine atmosphere, it is best to use 316 stainless steel. The advantages of using stainless steel in structural applications are well recognized. Several design criteria include 304 and 316 stainless steel. Because "duplex" stainless steel 2205 combines excellent atmospheric corrosion resistance with high tensile strength and elastic limit strength, it is included in the European standard. In fact, stainless steel is manufactured in all standard metal shapes and sizes, and there are many special shapes as well. The most common products are made of sheet and strip steel, and special products are also made of medium thick plates, for example, hot-rolled structural sections and extruded structural sections. There are also round, oval, square, rectangular and hexagonal welded or seamless steel tubes and other forms of products, including sections, bars, wires and castings. Specification for 7*19 (6*19+IWSC) stainless steel wire ropeCon.strDiameters   (mm)Appro weight.                      EN12385-4           DIN3060 KG/100meters                  Mill. Breaking Load(KN)Mill.Breaking Load(KN)1570MPA1770MPA1960MPA1570MPA1770MPA6*19+IWS   7*190.80.2580.3400.3760.4160.3400.3761.00.4000.5210.5880.6500.5210.5881.50.9201.2601.4301.5801.2601.4301.81.3201.8202.0502.2701.8202.0502.01.6302.2702.5602.8102.2702.5602.21.9802.7203.0603.3902.7203.0602.52.5503.5504.0004.4303.5504.0003.03.6805.1205.7706.3905.1205.2904.06.5309.09010.25011.3509.0909.4005.010.21014.2116.0217.74014.21021.2006.014.70020.50023.10025.50020.50028.2008.026.14036.40041.00045.40033.30037.60010.040.84056.80064.10071.00052.10058.80012.058.81081.80092.300 75.00084.60014.080.050111.40125.60 102.00115.0016.0104.55145.55164.00 133.00150.0018.0132.32181.70  169.00190.0020.0163.36224.40  208.00235.0022.0197.67271.50  252.00284.0024.0235.24323.00  300.00338.0026.0276.08378.00  352.00397.0028.0320.19439.08  409.00461.00Dia30.0mm-50.0mm/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(f