HDPE Biocell Filter Media Bio Film Carrier K1 K3 Mbbr for Waste Water Treatment

MBBR Bio Media for fish farming water treatmentMoving bed biofilm reactors for water treatment Small Boss MBBR filter media is a novel biologically active carrier, it adopts scientific formula, depending on the nature of water, blending a variety of beneficial microorganisms grow quickly attached trace elements in polymer materials, through a special process modification, constructed, with more than large surface area, hydrophilic, high biological activity, biofilm fast, good effect, good impact resistance.Rich export experience allows us to export MBBR to more than 160 countries around the world. Excellent Resistance to Shock Load Performance.Efficient processing capacity, its ability to remove organic matter 2-5 times higher than that of other traditional methods, high concentrations of biomass and diversity of biological fungus, strong resistance to impact load capacity. Technical SpecificationsSmallBoss® MBBR Advantages·Type: PE05·Spec.: 25mmX 12mm·Density: 0.94-0.97g/cm³·Material: Virgin HDPE ·Dosing ratio: 15%-70%·Packing number: >97000pcs/m³·Active surface area: >600m²/m³·Life span: >15years·Nitrfication efficiency:        400-1200g NH4-N/m³.d        ·High hydrophilicity and excellent adhesion to surfaces·High bio-activity and bio-film short time·High impact resistance and stable operation·Less residual sludge·High volume load, high filling rate and less land occupation·Cost-effective, easy to operate and maintain·Rebuild-free, easy to upgrade or expand·Long service life more than 15 years      ModelSize(mm)Specific Surface Area(m2/m3)Bio-film formation Duration(days)Nitrification EfficiencyPreferential Temperature (ºC)Services life(years)Number of unites per m3PE01Φ12×9>8005-15400-1200630,000PE02Φ11×7>9005-15400-1200830,000PE03Φ10×7>10005-15400-1200850,000PE04Φ16×10>8005-15400-1200260,000PE05Φ25×12>6005-15400-1200118,000PE06Φ25×12>6005-15400-1200118,000PE08Φ5×10>35005-15500-14002,000,000PE09Φ15×15>9005-15500-1400230,000PE38Φ25×12>8005-15400-1200118,000PE64Φ25×4>12005-15500-1400210,000    SmallBoss® MBBR ShapeIt depends on the good structure and shape to grow more biological membrane. Excellent shape can provide better protected surface area and protect the biological membrane grow.  The Applization of Smallboss® MBBR ·Pulp and Paper industry·Food and Drink·Coke and Steel Mill·Sewage Treatment Plant·Wastewater Treatment·Dairy Industry ·Beverage Factory·Automobile Industry·Chemical Industry·Food Wastewater·Chemical Waster ·Aquaculture and Koi Ponds·Integrated Container A²O    Process with Small Footprint·Printing and Dyeing Wasterwater·Wastewater Treatment System ·Municipal Wastewater Treatment How The SmallBoss® MBBR WorksThe MBBR process utilizes floating plastic carriers (media) within the aeration tank to increase the amount of microorganisms available to treat the wastewater. The microorganisms consume organic material. The media provides increased surface area for the biological microorganisms to attach to and grow in the aeration tanks. The increased surface area reduces the footprint of the tanks required to treat the wastewater. The media is continuously agitated by bubbles from the aeration system that adds oxygen at the bottom of the first compartment of the aeration tank. The microorganisms consume organic material. When compared to conventional secondary treatment it provides superior efficiency and value.Frequently Asked Questions. 1.Why did others hang the film faster after adding sucrose, is the pure HDPE material already eliminated?Answer: No, it is not. With the addition of sucrose and other additives, it is true that the film will be fast, but after a long time, the loss of sucrose will cause the early attached microorganisms to fall off. It will also cause the quality of MBBR carriers to decline, the structure to be unstable, more easily broken, and increased costs. MBBR made of pure HDPE material will last for more than 15 years. 2.Why is the aerobic pool very cloudy? I obviously increased the aeration volume!Does n't it mean that the more aeration of the aerobic tank, the better?Answer: Because the aeration volume of the aerobic tank looks simple, it should actually be just right. If the amount of aeration is insufficient, the nitrification effect will be poor, and the fluidization effect will be poor, and the nitrifying bacteria cannot be fully cultured. However, too much aeration will cause the sludge to swell and fall, resulting in muddy water. Therefore, the specific analysis of specific problems requires the control of aeration for specific problems. 3.After adding MBBR bio-filler, do I still need to add bio-mud?Answer: Depending on the situation, if in the anoxic and anaerobic stages, biological mud is unavoidable and must be added. However, in the aerobic tank, if the temperature is moderate, the nitrification effect is good, and it can be omitted. If the number of bacteria is insufficient, an appropriate amount of bio-mud can be added to promote the film-hanging rate. 4.