0.3mm/0.5mm/0.75mm/1mm/1.5mm/2mm Factory Price ASTM GM13 Waterproof HDPE/Geomembrane/Pond Liner for Aquaculture/Dam/Landfill/Tunnel/Mining/Biogas/Fish Farm

Factory Price 0.2mm-3mm ASTM GM13 Anti-Seepage Waterproof Impermeable HDPE Geomembrane Pond Liner for Aquaculture/Dam/Landfill/Tunnel/Mining/Biogas/Fish Farm  OBOR HDPE Geomembrane is produced from 100% virgin high density polyethylene resin by film-blowing process, adding carbon black, antioxidant, anti-aging and UV-resistance component, as a waterproofing system has many advantages for your applications, and makes good results multiply. The most notable advantages are:1. Very high chemical and thermal resistance level.2. This type of installation has a very long service life.3. Costs are lower compared to other facilities.4. It is very resistant against possible impacts.5. Resistant to acids and most liquids. Also in the water up to about 100ºC.6. The use of high-density polyethylene makes the geomembrane flexible even at low temperatures.7. It has lightness.8. Quality control is performed during the installation process.9. Compared to low-density polyethylene, it is stiffer.HDPE Geomembrane SpecificationThickness0.5mm, 0.75mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mmWidth2m, 3m, 4m, 5m, 5.8m, 7m, 8m, 10m, 12mLength30m, 50m, 100m, 105m, 140m, 210m, 420mColorblack, white, blue, greenSurfacesmooth surface, single surface textured, dual surfaces texturedStandardASTM GRI GM13Raw Material100% virgin high density polyethylene resinMain FeatureUV resistance, Waterproofing, High tearing resistance, Puncture-resistingHDPE Geomembrane Application: 1. Environmental protection and environmental sanitation (living landfill yard, sewage & discharge liquid treatment plant, power plant adjusting tank, industrial and hospital solid waste etc)2. Water conservancy (anti-seepage, leakage blockage and reinforcement of river, lake and reservoir dikes and banks, anti-seepage of canal, vertical central wall, side slope etc)3. Municipal projects (underground project of subway and structure, anti-seepage of plantation roof and roof garden, lining of sewage pipe etc)4. Mine industry (heap leaching tank, tailings disposal, bottom lining and anti-seepage of washing and selecting tank, ash yard, dissolution tank etc)5. Traffic facilities (reinforcement of road foundation and anti-seepage of subway and tunnel)6. Agriculture (anti-seepage of ditch, channel, reservoir, drinking water tank, pool and irrigation system)7. Animal husbandry(biogas Pool etc)8. Aquaculture (lining of intensive and plant type cultivation tank, fish pound and shrimp pool, side slope of sea cucumber ring etc)9. Landscape garden (man-made lake, river way, cistern, bottom lining and side slope of pool in golf course, waterproof and anti-seepage of greening lawn etc)10. Petrochemical industry (anti-seepage of oil tank of chemical plant, oil refinery and filling station, lining of chemical reaction tank and sedimentation tank etc)11. Salt industry (crystal tank of salt field, tarpaulin cover of halogenation tank, salt film, plastic tarpaulin cover of salt tank)HDPE Geomembrane ProductionOBOR hdpe geomembrane pond liner is produced from 100% virgin high density polyethylene resin by film blowing process, adding carbon black, antioxidant, anti aging and UV resistance component, which with good flexibility, high tearing resistance, and UV stable property. HDPE Geomembrane Technical ParameterPropertiesTest MethodASTMOBOR0.5OBOR0.75OBOR1.0OBOR1.25OBOR1.5OBOR2.0OBOR2.5OBOR3.0ThicknessD51990.50mm0.75mm1.00mm1.25mm1.50mm2.00mm2.50mm3.00mmDensity (≥)D15050.940g/cc0.940g/cc0.940g/cc0.940g/cc0.940g/cc0.940g/cc0.940g/cc0.940g/ccTensile Properties(Each direction) (≥)• yield strength• break strength• yield elongation• break elongationD6693Type IV8 kN/m14kN/m12%700%11 kN/m20kN/m12%700%15 kN/m27 kN/m12%700%18 kN/m33 kN/m12%700%22 kN/m40 kN/m12%700%29 kN/m53 kN/m12%700%37kN/m67kN/m12%700%44kN/m80kN/m12%700%Tear Resistance (≥)D100463 N93 N125 N156 N187 N249 N311 N374 NPuncture Resistance (≥)D4833160 N240 N320 N400 N480 N640 N800 N960 NStress Crack Resistance (≥) D5397500 hr.500 hr.500 hr.500 hr.500 hr.500 hr.500 hr.500 hr.Carbon Black ContentD16032.0-3.0%2.0-3.0%2.0-3.0%2.0-3.0%2.0-3.0%2.0-3.0%2.0-3.0%2.0-3.0%Carbon Black DispersionD5596Note(1)Note(1)Note(1)Note(1)Note(1)Note(1)Note(1)Note(1)Oxidative Induction Time (OIT) (≥)(a)Standard OIT- or -(b)High Pressure OITD3895D5885100 min.400 min.100 min.400 min.100 min.400 min.100 min.400 min.100 min.400 min.100 min.400 min.100 min.400 min.100 min.400 min.Oven Aging at 85°C (a) Standard OIT (min. ave.)- % retained after 90 days(b) High Pressure OIT (min. ave.) - % retained after 90 daysD5721D3895D5885 55%80% 55%80% 55%80% 55%80% 55%80% 55%80% 55%80% 55%80% UV Resistance (7) (a) Standard OIT (min. ave.)(b) High Pressure OIT (min. ave.) - % retained after 1600 hrs (9)D3895D5885 Note(2)50% Note(2)50% Note(2)50% Note(2)50% Note(2)50% Note(2)50% Note(2)50% Note(2)50% Standard Width (meter)/88888888Standard Length (meter)/4202802101681401058470Note(1): Carbon black dispersion (only near spherical agglomerates) for 10 different views: 9 in Categories 1 o