Ad600 Series Three Phase 380V 0.75kw/1.5kw/2.2kw/4kw Low Power Universal Frequency Converter

Input & OutputAnalog input1 channel,voltage / current signal can be switched,voltage 0~10V,current 0~20mADigital input5 channels,Optocoupler isolationAnalog output1 channel, voltage 0~10V,current 0~20mA,Output type switchableDigital output1 channel, Optocoupler isolation / open collector output / rated current 20mA (Y terminal)Digital pulse output1 channel,Optocoupler isolation / open collector pulse (frequency or PWM) output (Y terminal)Relay output1 channel,Normally open and normally closed contact, 250VAC-3ACommunication modeStandard MODBUS-485 communication protocolControl characteristicscontrol modeSpace voltage vector control modeFrequency setting modeKeyboard setting, analog setting, pulse setting, PID, communication setting and othersFrequency control range0.01~400HzSpeed regulation ratio1:100Steady speed accuracy±0.5%(SVC)Multistage speed controlBuilt in simple PLC can control the maximum 16 speed frequency logicCarrier adjustable1.0~16kHz ,adjusted according to the module temperatureImportant functionsShutdown mode, bus overvoltage protectionProtection functionOverload capacity60s-rated current x 150%; 10s-rated current x 180%;3s-rated current x 200%Open phase protectionIn case of phase loss at the input or output end, the motor stops freelyOverheat protectionThreshold can be set freely according to the ambient temperature, accuracy is ± 3 ºCStall protectionPrevent stall during acceleration or deceleration or operation (working current can be set)Grounding protectionby current sensorInstant stopThe load feedback energy compensates for the voltage reduction and maintains the continuous operation of the frequency converter in a short timeSpecification structureRated inputvoltage:1PH220V±15%; 3PH380V±15%Frequency:50Hz/60Hz±5%Cooling and protectionIP20;forced coolingUse environment-10ºC~+50ºC;Derating above 40 ºC; Altitude: not higher than 1000m; Indoor, no corrosive gasPreservation environment-20ºC~+65ºC;Humidity: 20-90% RH (no condensation); shock