EDR-150-24 Meanwell 150W Single Output Industrial DIN Rail Switching Power Supply

Basic Info.Model NO.EDR-150-24Output Type Single Warranty 1 Year Output PowerFeatures Universal AC Input / Full Range ProtInput Voltage90~264 VAC 127~370 VDCConnection ModeSeries Switching Power SupplyVoltage Regulating ModeOtherPower Supplying SystemOtherEnergy TransmissionOtherModulation SystemOtherCertificationCE, RoHSBrandYumoOutput DC Voltage 24V Impact Current6.5A/230 VAC 5.2A/115VACTrademarkYUMOTransport PackageCartonSpecificationNet weight: 1kgOriginChinaHS Code8504401990Product Description Features Universal AC input / Full rangeProtections: Short circuit / Overload / Over voltage/ Over temperatureCooling by free air convectionCan be installed on DIN rail TS-35/7.5or 15UL 508 (industrial control equipment) approvedEN61000-6-2(EN50082-2) industrial immunity level100% full load burn-in test2 years warrantyApplications Industrial control systemSemiconductor fabrication equipmentFactory automationElectro-mechanical apparatusDescription  EDR-150-24 is one economical slim DIN rail power supply series, providing up to 156W at 230VAC input. This series is adapt to be installed on TS-35/7.5 or TS -35/15 mounting rails. The body is designed 40mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2(≤80% Load), the norm the European Union regulates for harmonic current.  EDR-150-24 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 87%,the entire series can operate at the ambient temperature between -20C and 60"C under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control . apparatus (UL508, TUV EN62368-1, and etc.) make EDR-1 50-24 a very competitive power supply solution for industrial applications. SPECIFICATIONMODELEDR-150-24OUTPUT DC VOLTAGE24VRATED CURRENT6.5A/230VAC 5.2A/115VACCURRENT RANGE0~6.5A/230VAC 0~5.2A/115VACRATED POWER156W/230VAC 125W/115VACRIPPLE & NOISE (max.) Note.2150mVp-pVOLTAGEADJ. RANGE24~28VVOLTAGE TOLERANCE Note.3±1.0%LINE REGULATION±0.5%LOAD REGULATION±1.0%SETUP, RISE TIME1500ms, 60ms/230VAC 3000ms, 60ms/115VAC at full loadHOLD UPTIME (Typ.)16ms/230VAC 10ms/115VAC at full loadINPUTVOLTAGE RANGE Note.690~264VAC 127~370VDC [DC input operation possible by connectingAC/L(+),AC/N(-)]FREQUENCYRANGE47~63HzEFFICIENCY(Typ.)87%AC CURRENT (Typ.)2.6A/115VAC 1.7A/230VACINRUSH CURRENT (Typ.)20A/115VAC 35A/230VACLEAKAGE CURRENT100M Ohms / 500VDC / 25 / 70% RH EMC EMISSIONCompliance to EN55032 (CISPR32) ClassA, EN61000-3-2, ClassA( 80% Load), EN61000-3-3, ClassAEMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteriaA, EAC TP TC 020OTHERSMTBF472.5K hrs min. MIL-HDBK-217F (25ºC)DIMENSION 40*125.2*113.5mm (W*H*D)PACKING0.6Kg; 20pcs/13Kg/1.16CUFTNOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47ut pall capacitor.3. Tolerance ; includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be nstalledl into a final equipment. The final equipment must be re-confirmed that it sil mets EMC directives.5. Intallation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanenty with full power, In case the adjacent device is a heat source, 15mm clearance is recommended.6. Derating may be needed under low input voltage. Please check the derating curve for more details.7. Hiccup mode al 90~100VAC, recovers automatically atter fault condition is removed,8. The ambient temperature derating of 3.5"C/1000m with fanless models and of 5C/1000m with fan models for operating altude higher than 200m(6500t). Mechanical Specification(mm)