Model Lrr6 3p Smart Circuit Breaker Made in China

1.Model LRR6 series Smart Auto Recloser Application                   1.1 LRR6 series smart auto recloser is designed to automatically reclose after the relevant protection device trips when a temporary fault occurs in the power system, so as to improve the reliability of the circuit power supply1.2 It can be widely used in power grid terminal lines, unattended mobile phone base stations, elevators, air conditioners, smart phones, smart homes, smart factories, new energy vehicle charging piles, etc.2.Model LRR6 series Smart Auto Recloser Characteristics2.1 It can be matched with MCB or RCD. When the MCB or RCD trips unexpectedly, it does not need to be closed manually, reducing manual maintenance costs, and timely troubleshooting to improve efficiency. 2.2 It can realize remote opening and closing control, timing tasks, and obtain the current switch status through wifi or a platform with RS485 connection. 2.3 Built-in multiple reclosing times, continuous closing failure within a certain period of time can send an alarm signal through the LED indicator light or APP. (for specific time and frequency, please refer to the parameter table) 2.4 Reclosing times and delay time can be set up and adjusted as per request.  2.5 With manual/automatic selection switch and mechanical lock function.  2.6 Used in conjunction with circuit breakers and leakage switches to provide overload, short circuit and leakage protection.  2.7 The working status is indicated by LED etc.3.Model LRR6 series Smart Auto Recloser Main technical parametersModelLRR6-WifiLRR6-RS485Communication methodWifi, ZigBeeRS485Supply terminalsL-NRated voltage UeAC 230VPower consumptionAC max.1VA (standby), max.20VA (action)Supply voltage tolerance±10%Status IndicatorGreen LEDRed, green and yellow tri-color LEDTrip time≤ 1sMechanical life10000 CyclesElectrical life4000 CyclesAmbient temperature-20ºC to +55ºC (-4 ºF to 131 ºF )Storage temperature-35ºC to +75ºC (-22 ºF to 158 ºF )InstallationMounting on 35mm DIN railPollution degreeIP20Supply terminal size for cableMax. 2.5mm²Dimensions91×18×61mmCompatible DeviceMCB (LRM6-63), RCCB, RCBO (LRE6-63, LRE6L-63)(More compatible devices are in development)Remark:The Wifi-type smart module needs to configure the network when it is used for the first time, and the Tuya App needs to be downloaded and installed on the mobile phone. The smart module and the mobile phone are required to be matched under the same wireless network. If the network device is replaced, the smart module needs to reconfigure the network.4.Description of Automatic, Manual Mode Switches and Mechanical Locksof Smart Auto Recloser AUTO  Mode: Allow remote control (Tuya APP, RS485).MANU Mode: Remote operation is prohibitedMechanical Padlock:When the mechanical lock is pulled out, the device will enter the locked state, and the device will not be closed to ensure the safety of on-site maintenance. Press the mechanical lock to restore it.4.Model LRR6 Smart MCB Technical ParameterStandardIEC/EN60898-1IEC/EN60947-2ProtectionOvercurrent and short circuitType of tripThermo-magneticNo.of poles1P,2P,3P,4PRated currents In1,2,3,4,5,6,10,16,20,25,32,40,50,63ARated voltage  Ue240/415V~Rated frequency50/60HzRated breaking capacity6,000AEnergy Limiting Class3Rated impulse withstandard voltage(1.5/50) Uimp6,000VDielectric test voltage at Ind. Freq.for 1 min2kVThermal release characteristic(1.13-1.45) x In(1.05-1.30) x InMagnetic release characteristicB: (3-5) x In, C: (5-10) x In(8-12) x InElectrical life8,000 CyclesMechanical life20,000 CyclesContact position indicatorYesProtection degreeIP20Ambient temperature-5ºC to +40ºC Max.95%humidityTerminal connection typeCable/Pin-type busbarMax.terminal size for cable25mm2Max.tightening torque2.5N.mInstallationMounting on 35mm DIN railConnectionFrom top and bottom5.LRR6 Smart Closer with LRM6-63 MCB Product Size and Wiring Method  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1