Mini Circuit Breaker Rdx6-63 Serise 230V/400V 10ka People Electrical

Product Description RDX6-63 miniature circuit breaker is applicable to a circuit of AC50/60Hz, 230V (single phase), 400V (2, 3, 4 phases), for overload and short circuit protection. Rated current up to 63A. It also can be used as a switch for an infrequent conversion line. It is mainly used in domestic installation, as well as in commercial and industrial electrical distribution systems. It conforms with the standard of IEC/ EN60898.Application1.Temperature: The upper limit of surrounding air temperature should not exceed +40ºC, the lower limit should not be lower than -5ºC, and the 24h average temperature should not exceed +35ºC.2.Altitude: The altitude of the installation site should not exceed 2000m.3.Humidity: The relative humidity of the atmosphere does not exceed 50% when the ambient air temperature is +40ºC. Higher relative humidity can be allowed at lower temperatures. Special measures should be taken for condensation that occasionally occurs on the surface of the product due to temperature changes.4.Pollution level: Grade 2.5.Installation conditions: Installed in a place without significant shock and vibration, and in a medium without explosion hazard.6.Installation method: Installed with TH35-7.5 mounting rail.7.Installation category: Class II, III. Model No.Main technique parameterThe overcurrent release characteristics of the circuit breaker under normal installation conditions and reference ambient temperature (30-35)ºC are in accordance with the provisions of Table 1.The main technical performance indicators of the circuit breaker are shown in Tables 1 and 2.         Table1No.Tripping type Rated current In Test current A Approximate time Expected result Starting state1C,DAll values1.13Int≤1hdoes not decouplecold state2C,DAll values1.45Int≤1hdecoupleimmediately after the serial number 1 test3C,D≤32A2.55In1s