Electrical Equipment Surface Mounted 40 Ways MCB Circuit Breaker Power Distribution Box Distribution Electrical Box

Product description:Plastic distribution box has the following characteristics: waterproof, dustproof, acid-resistant, alkali-resistant, impact-resistant, explosion-proof, anti-ultraviolet radiation, insulation non-conductive and other excellent characteristics, and is widely used in outdoor terminals, ports, field power distribution engineering, communications, mechanical equipment, chemical, petroleum and other bad environments.Installation precautions:1.The elevation or perpendicularity of the distribution box exceeds the allowable deviation, which is caused by inaccurate measurement and positioning or uneven ground, and should be corrected in time.2.The iron frame is not square. If the iron frame is not straightened and aligned before installation, or the fixed point position is offset during installation, the suspension wire shall be used for re-alignment before fixing.3.The panel electric tools and instruments are not firm, flat or uneven, the indenter is not firm, the indenter damages the wire core, and the multi-strand wire indenter is not equipped with crimping terminals. No card frame is installed under the brake. If the screws are not tight, they should be tightened, and the spacing should be high speed and uniform as required, and leveled. The damaged part of the wire core shall be cut off and reconnected, the multi-stranded wire shall be installed with crimping terminals, and the card frame shall be supplemented.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1