Anti-Interference Signal Isolator 1 in 1 out Signal Conditioner with 4-20mA Output

Product Description. This current signal isolator isolates the input,output and power from each other.. It solves the problem that affects the running of the device,such as the group loop,measurement circuit and the signal interference etc.. It supplies power independently for field 2-wires instrument,meanwhile isolates and transmits the 4-20mA signal into standard current or voltage signal.. Input terminal is in common use for current source,2-wires and 3-wires..Standard 35mm DIN railindependent mounting. High precision,High linearity,Low temperature drift. Full channel configuration,Parameter customizable.Product Parameters                                                                 InputInput Signal4-20mA;0-20mA;0-10mA;customizedDistribution Voltage24V(max drive current:30mA)Input Impedance≤50Ω                                                               OutputOutput Signal4-20mA;0-20mA;0-10mA;0-5V;0-10V;1-5V;customizedOutput Load ResistanceRL≤500Ω(output current signal);RL≥10KΩ(output voltage signal);                                                                 Other ParametersPower SupplyDC24V,±10%Current consumption≤50mA(1 in 1 out,24V power supply output 20mA)AccuracyDC;±0.1%F.S.Respond Time≤10mS(0-90%) (TYP)Temperature Drift0.005%F.S./ºC (-20ºC~+55ºC)Isolation Intensity1500V AC/1min(between input-ouput-power)Insulation Resistance≥100MΩ(between input-ouput-power)EMCcomplies with GB/T 18268(IEC61326-1)Applicable Equipment2-wires,3-wires transmitter;current sourceWorking Temperature & Humidity-20ºC~+55ºC/