110kw Solar Inverter Solis-110K-5g-SA Solis Three Phase Inverters

110KW Solar Inverter Solis-110K-5G-SA Solis Three Phase InvertersIntroduction:Inverter is an indispensable part of AC photovoltaic power generation system. At present, due to various technical or policy reasons, it will take a long time to connect all independent photovoltaic AC power generation systems to the national unified power grid. Therefore, PV inverter can be divided into two types: off grid PV inverter and grid connected PV inverter.There is no big difference between photovoltaic off grid inverter and photovoltaic grid connected inverter in the main circuit structure. The main difference is that the photovoltaic grid connected inverter needs to consider the operation safety of grid connected and grid connected. That is, the ability to control special situations such as the same frequency, the same phase, and the ability to resist islanding. The photovoltaic off grid inverter does not need to consider these factors. Classified by inverter output1. Single phase inverter;2. Three phase inverter;3. Polyphase inverter Performance and features:1. 16 bit MCU or 32-bit DSP microprocessor is used for control.2. PWM control mode, greatly improve the efficiency.3. Digital or liquid crystal display of various operating parameters can be used to set relevant parameters.4. Square wave, correction wave and sine wave output. Sine wave output, waveform distortion rate is less than 5%.5. High precision of voltage stabilization. Under rated load, the output precision is generally less than plus or minus 3%.6. It has slow start function to avoid the impact of large current on the battery and load.7. High frequency transformer isolation, small volume and light weight.8. Equipped with standard R232 / 485 communication interface, convenient for remote communication control.9. It can be used in the environment above 5500 meters above sea level and adapt to the environmental temperature range of 20 ~ 50 ºC.10. It has many protection functions, such as input reverse connection protection, input undervoltage protection, input overvoltage protection, output overvoltage protection, output overload protection, output short circuit protection, overheat protection, etc. Specification for Reference:Solis-110K-5G-SAMax. input voltage1100 VRated voltage600 VStart-up voltage195 VMPPT voltage range180-1000 VMax. input current10*26 AMax. short circuit current10*40 AMPPT number/Max. input strings number10/20Rated output power 110 kWMax. apparent output power121 kVAMax. output power 121 kWRated grid voltage3/N/PE, 220 V / 380V , 230 V / 400 VRated grid frequency50 Hz / 60 HzRated grid output current 167.1A/158.8 AMax. output current 183.8 APower Factor>0.99 (0.8 leading - 0.8 lagging)THDi