Submersible Tank Liquid Level Switch with Wireless Remote Control

Submersible Tank Liquid Level Switch With Wireless Remote Control Product DescriptionNo External Power Requirments Magnetic Float Ball Level Switch From China is made up of reed pipe and magnetic float. It is based on the buoyancy principle, using the floating ball with magnetic components to drive the corresponding position of the reed tube to close or disconnect, so as to realize the detection and control of the high and low position of the liquid level. No External Power Requirments Magnetic Float Ball Level Switch From China is equipped with 8 switches for 8 point detection. When the magnetic float ball level switch works, it has no direct contact with the measured medium, no mechanical wear and tear on the contacts, and it can work without external power supply. Product features1, long life span, stable and reliable operation, easy installation, almost no maintenance 2, none influence of measured medium in physical and chemical state. Eg: medium electrical conductivity,  dielectric constants, foam, pressure, temperature, evaporation, boiling, bubbling effect etc, .3, choose appropriate material can be used in a variety of bad media environment with densities ≥ 0.5G/CC ; 4,-interface measurement with two media of different density control;5,wide range of application. Pressures from vacuum to PN160 (special up to PN320), temperature -40~+150 ° c; 6,design, explosion-proof, suitable for explosive environments; 7,UHKG controller can be used to control the upper and lower liquid level. Technical Data:Max insert depthL=6m(>6m customize)Max control scopeL-120mmMin control scope50mm(0.5g/cm3Working pressurePN2.5~ PN160(Max pressure PN320)Working temperature-40~80 °C, -40~120 °C, -40~150 °C (250°C customize )Float diameterD28~D120(depending on pressure and density)   Installation typeFlange: DN40~DN150Flange standard: HG/T20592~2009(pressure>PN25, Flange>DN125)G2'' threadOther method (consulting)Maximum switch frequency