Material Solid Powder Cement Rotary Paddle Level Switch Paddle Flow Switch

Working PrincipleZX rotary switch is a level controller for solid materials (including powder, block, granular, gel, etc.). The motor drives the blade to rotate. When the measured medium reaches the blade position, the blade is blocked and stops rotating, thereby triggering the micro switch to output the switch signal. When the measured medium descends away from the blade, the blade returns to the original position and continues to rotate under the action of the spring. The tension of the spring can be adjusted according to the specific gravity of the measured medium, and the spring with the material ratio is adjusted to the strongest, and vice versa.The rotary switch has been widely used in the chemical, plastic, cement, pharmaceutical, feed, food and other industries.Features1, with overload protection to prevent motor damage2. Good sealing performance, strong overload capability and large output contact capacity.3. The torque is stable and adjustable. According to the different specific gravity, the sensitivity of the switch can be adjusted by adjusting the tension of the spring.4, special design blades can be used for low density materialsSpecificationsDetection method:rotation blade resistance detectionBlade speed:1RPM (rev / min)Torque:1.0 kg x cmContact capacity:250VAC/10A 1 SPDT (single pole double throw)Material specific gravity:≥0.5g/cm3Working temperature:-10 ° C ~ +80 ° C (up to 400 ° C)nsulation resistance:≥100MΩDielectric strength:1500V/1minProtection level:IP65Working power:220VAC, 110VAC, 24VDCPower consumption:4 WThreaded Rotary Paddle Level SwitchFlange Connectioned Rotary Paddle Level SwitchWhy Choose Us:1. 23 years of instrumentation equipment production experience2. Product support OEM, ODM, export to more than 100 countries3. The company area 20,000 square meters, and 150+ orders per month4. Provide email, skype, whatsapp provide 24-hour one-on-one technical support service onlineCompany InformationFAQQ: The new magnetic flap liquid level gauge can't show liquid level?A: 1.check whether there is block in by pass pipe 2.check the the density of medium 3.check whether the float ball is stucked by float ball.Q: The longest length of magnetic flap liquide level gauge?A: the length is customized,but in order to be convenient for transport,if the length is over 6m,we recommendQ: If the float ball is installed at the wrong opposite direction,what's the influence?A: reading level will be higher than true level,usually higher by length of floatball-70mmQ: What's installation details of magnetic flap liquid level gauge ?A: 1.before installation,check specification with label plate. 2.There shouldn't magnetic field within 400mQ: There is problem in output signal 4--20mA?A: 1.Check working power supply 2.check wiring 3,check load resistance 4.verify measuring range,zero pointQ: what's specification we need to know before purchasing magnetic flap liquid level gauge?A: medium density,working temperature,working pressure,material,flange center to center distance,flange standard,whether need 4--20mA output signal;wether need level alarm/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1