Durable IP67 Plastic Optical Thru-Beam Sensor for Motor Swing Barrier Gate with CE

  Product DescriptionFeaturesThe most economical, cost-effective alternative which could be a replacement for PM18TNew optical structure for effective light interference suppressionBuilt-in power reverse polarity protection circuit, over-current protection circuit, and output protection circuitInternal epoxy encapsulation to withstand harsh external environmentsThe PS18T is the most common type used on revolving gates to detect break-insProtection rating IP67 with new technology design, stable structureDetection distance of 20mWorking PrincipleThe PS18T photoelectric sensor installed at the turnstile gate is used to detect whether someone is breaking into the turnstile gate. When the card is swiped outside the yellow line, there is no object at the gate, the sensor signal is normal and the wing gate will open; if someone enters inside the yellow line, the sensor signal at the gate changes and the wing gate will not open even if the card is swiped. This design aims to prevent the opening and closing of the wing gates when the card is swiped within a short distance, causing a safety hazard, and also to prevent break-ins. ModelProduct SeriesProduct ModelSupply VoltageSensingDistanceHousingOutput ModeAction ModePS18TPS18T-2ND10~30V DC20mPC+ABSNPNDark OnPS18T-2NLNPNLight OnPS18T-2PDPNPDark OnPS18T-2PL   PNPLight On  Product Parameters  Photoelectric sensorPS18T-2NDDetection TypeOpposed typeDetecting ObjectMin Φ18mm opaque objectDetecting Distance20mSupply Voltage10~30V DCNo-load CurrentEmitter: Max.12mA; Receiver: MAX.7mAResponse TimeMax.4msLight SourceInfrared LED(850nm)Action ModeDark OnControl OutputNPN open collectorIndicatorPower indicator:Green   Action indicator:RedCircuit ProtectionReverse polarity protection, short circuit protection, over voltage protectionAmbient BrightnessSunlight:Max.60000lx;Fluorescent:Max.3000lxAmbient Temperature-30~+60ºC(Non-freezing),Storage:-40~+80ºCAmbient Humidity0~90%RHMaterialHousing:PC+ABS; Cable: PVCCableEmitter:black  Receiver: Grey   Φ4,  2mProtection RateIP67AccessoryScrew Photoelectric sensorPS18T-2NLDetection TypeOpposed typeDetecting ObjectMin Φ18mm opaque objectDetecting Distance20mSupply Voltage10~30V DCNo-load CurrentEmitter: Max.12mA; Receiver: MAX.7mAResponse TimeMax.4msLight SourceInfrared LED(850nm)Action ModeLight OnControl OutputNPN open collectorIndicatorPower indicator:Green   Action indicator:RedCircuit ProtectionReverse polarity protection, short circuit protection, over voltage protectionAmbient BrightnessSunlight:Max.60000lx;Fluorescent:Max.3000lxAmbient Temperature-30~+60ºC(Non-freezing),Storage:-40~+80ºCAmbient Humidity0~90%RHMaterialHousing:PC+ABS; Cable:PVCCableEmitter:black  Receiver: Grey   Φ4,  2mProtection RateIP67AccessoryScrewCertificationsInstallation Instructions  Recommended Products Company ProfileTianjin G-TEK Sensor Technology Co., Ltd. is located in Gaotai Science and Technology Park, Xiqing District, Tianjin and it is a technology-based enterprise specialized in R&D, production and customization of intelligent sensor system solutions. The company manufactures laser radar, TOF3D camera, laser ranging sensor, measurement and safety light curtain, photoelectric sensor, proximity switch and other products with core technology, serving intelligent transportation, logistics automation, factory automation, robot, intelligent security and other fields.Packaging & Shipping  FAQQ: What kind of products do you manufacture?A: Our products include photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.Q: Can I get some samples?A: Yes, Sample orders are welcomed.Q: Have photocell sensors 100% assembled well in stock?A: We have some standard photocell sensors in stock with limited quantity; Whilealmost all photocell sensors will be newly produced according to your order.Q: What is the delivery time?A:  15-30 days for mass production depends on different productsQ: What is your MOQ?A: We provide small MOQ for each item; it depends on your specific order.Q: Do you have customization service?A: Yes, We can provide customized products while the customization needs to meet certain quantity.Q: Do you test all goods before delivery?A: Yes, We have 100% test before delivery.Q: What is your payment term?A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.Q: Do you provide warranty for the goods?A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.Q: May I visit your factory?A: Sure, You are always welcome to visit us./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1