Customized SS316 PVDF PP TI Housing Level Sensor Submerged IP68 Pressure Transmitter

Product Overview:HPM47W-CSN submerged pressure transmitter is all sealed submerged structure and adopts ceramic capacitor pressure sensor. The probe threw in the measured medium adopts 316L or titanium alloy. The gas-guide cable adopts special anti-corrosive liquid level wire, which is mainly used for liquid level measurement of acid, base and other corrosive medium. The shell of the product adopts all-welding technology, and at the same time, the connection of the shell, wire and other links is multi-designed for reliable sealing. The internal adopts all-filling sealing technology, which ensures that the product has a good service life, and is widely used in chemical industry, water treatment, environmental protection, medicine, industrial process control and medicine industries etc.Features:·High-purity ceramic material (99.99% Al2O3) sensor·Whole welding process·Wide range from 0.5 meter to 400 meters·Whole potting process, high molecular sieve, prevent dewParameters:Pressure Range(Ceramic Capacitor)Pressure rangeGauge Pressure(kPa)102040100200400100020004000Min pressure rangeGauge Pressure(kPa)510205010020050010002000Overload (kPa)400600600100018002500400040006000  Measurement MediumMedium TypeAny of various liquids compatible with contact materials  Output Signal/Power SupplyStandardTwo wires:4~20mADC                            /Vs=10~30VdcStandardTwo wires:4~20mADC+HART               /Vs=12~32VdcStandardThree wires:0~5V etc                               /Vs=10~30VdcStandardFour wires:Modbus-RTU/RS485             /Vs=3~8Vdc or 10~30Vdc  CharatisticsAccurate±0.2%F.S.(Typical)±0.1%F.S.(HART)* Accuracy refer to IEC 60770(nonlinear, hysteresis, repeatability)Load Resistant4~20mADC two wires:RL≤(U-10)/0.02Ω4~20mADC+HART two wires:RL≤(U-12)/0.02ΩVoltage three wires:RL>10kΩLong Stability±0.1%FS/yearResponse TimeAbout 1msBoot time≤3s  Temperature drift CharatisticsTemperature Compensation Range-20~80ºCZero Temperature drift±1.0%FS(within Temperature Compensation Range)Full Temperature drift±0.8%FS(within Temperature Compensation Range)  EnvironmentTemperature RangeWorking Environment Temperature: -20~85ºCMeasurement Medium Temperature: -20~85ºCStorage Temperature: -30~85ºCProtection GradeIP68Electrical ProtectionShort-circuit protectionPermanenceReverse Polarity ProtectionNo damage, circuit not workingElectromagnetic Compatibility Compliance EN61326Mechanical stabilityVibration20g(20~5000Hz)Shock Resistant20g(11ms)InsulationInsulation Resistant>100MΩ,500VDCInsulation  Strength500VAC 50Hz Test voltage,1min no breakdowns and arcsStrcture Material:CodePositionInstructionS6Probe Housing316LTI Titanium AlloyM6SensorCeramic Al2O3 99.9%F1O-ringFKM(Temperature range -20~200ºC)F2 FFKM(More anti-corrosion,temperature range -25~300ºC)FECablePTFE cable,outer diameter(7.2±0.2)mmPU PU cable,outer diameter(7.2±0.2)mm  Weight(Unit:g)ProbeHousing Material316LTitanium AlloyWeight~660~400CableCable materialPTFEPUWeight(1m)~60~50Structure Drawings:* The size is the distance between the induction diaphragm and the bottomInstallation(Unit:mm)Thread installation (W1) dimension weight:~450g 1.Used for fixing and supporting the whole product on the top2. Besides G1 thread, other threads can be customized if needed1. Used for fixing products in some areas with fast flow rate2. Used for fixing products in some medium with excessive density3. Avoid measurement errors caused by floating and moving products4. Up to 3 hammers can be connectedUsed to secure and support the entire product on topThreaded Mounting (W1)                           4.  Wire clamp (W8)Top connecting weight hammer (W2)        5.  Protective tubePressure transmitter                                   6.  Bottom connection heavy hammer (W3) *Electrical Connection:4 ~ 20mADC two-wire output transmitter electrical wiring diagramThree-wire voltage output transmitter electrical wiring diagramMODBUS-RTU /RS485 output transmitter Electrical wiring diagramOrdering Guide:Certification:FAQ:1.    Q: Are you manufacturer or trading company?        A: We are manufacturer which focuses on sensor for 10 years.2.    Q: What's your quality control system?        A: MC, ISO9001, CE Certificated.3.    Q: What is the warranty of your products?        A: Our warranty time is 18 months after shipment.  4.     Q: What is lead time of your product?         A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.  5.     Q: Do you provide customized products?         A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.  6.     Q: What is your MOQ?        A: We have no MOQ limit, small quantity order is acceptable. 7.      Q: What's the transport?                                                                      A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight