Equipment Low Insertion Lossxh-28-D1X2-U Optical Switch

Basic Info.Model NO.XH-28-D1X2-UApplicationIndustrialCustomizedCustomizedUsageFiber Optical SwitchesWave RangeC Wave Range ProgramTypeDigitalTrademarkxionghuaTransport PackageCarton PackingSpecification270mm X 190mm X 135mmOriginChinaHS Code8517622990Product DescriptionXH-28-D1X2-U optical switch equipmentFeatures(1) It has the characteristics of low insertion loss and fast switching speed.(2)It can be controlled by RJ45 Ethernet or RS-232 serial port command.(3)28 independent control optical switch buttons, easy to operate.(4)Two different colors of LED display lights, showing the status of the light path.(5) Equipment power supply supports AC: 85~265V AC power supply.Performance  NameParameterModelXH-28-D1X2-UWorking wavelength850/1310nmTest wavelength850nmInsertion loss≤ 1.5 dBRepeatability≤ ±0.02 dBReturn loss≥ 35 dBCrosstalk≥ 50 dBWavelength dependent loss≤ 0.25 dBPolarization dependent loss≤ 0.05 dBSwitching time≤10 ms(Adjacent channel)Fiber typeMM(50/125um)Connector formLCPC(customizable)Monitoring portRJ45,RS-232Working powerAC:85~265VOperating temperature-5 ~ +55ºCStorage temperature-40 ºC ~ +85 ºCChassis size270mm X 190mm X 135mmPanel description Front panel(1)RJ45 Ethernet interface, RS-232 serial port: Communication interface for equipment monitoring data information.(2)ON/OFF:AC-220V power switch.(3)1-28 buttons: 28 optical switch control buttons.(4) Whole station/single bay: The green light indicates that the light path is working in the whole station, and the red light means that the light path is working in a single bay.Right panelRear panel(1)AC:85~265V:AC 22V power interface.(2)1~28, 1-1~28-1, 1-2~28-2: optical fiber input or output ports; when the device is initially powered on, the optical path status is U row 1~28 U row 1-2~28-2 port, 1~28 of D row, 1-2~28-2 of D row, the indicator light is red; when the button is pressed, the light path indicator light turns green, and the optical path status is 1~28 of U row U row 1- 1~28-1 port, 1~28 of row D is connected to 1-1~28-1 of row D. Factory settings:The serial port settings are: 9600 baud, 8 data bits, 1 stop bit, no parity.IP address: 192.168.1.100; communication port: 5000Network port protocol type: TCP Server (server), UDP (fixed port: 18888)Note: Unless the user has special requirements.Ordering Information: XH-28-D1x2-U-A-B-C-D-E  Test wavelength(A)Fiber type (B)Protective sleeve(C)Fiber length(D)Connector(E)850:850nm1310:1310nmM5:MM,50/12590:900um05:0.5mLP: LC/PC*If there are other different requirements, the equipment can be customized