Cajas Nap 8 Puertos Distribution Box FTTH Waterproof Nap Box FTTH Terminal Box

Product DescriptionThe equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.  Features:Total enclosed structure.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP54.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance.Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.Product Parameters1,Environmental requirementWorking temperature:-40ºC~+85ºCRelative humidity:≤85%(+30ºC)Atmospheric pressure:70KPa~106Kpa2,Main technical datasheetInsertion loss:≤0.2dBUPC return loss:≥50dBAPC return loss:≥60dBLife of insertion and extraction:>1000 times3,Thunder-proof technical datasheetThe grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500VThe withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000VInstallation:  1.Wall-mounted installationDrill 2 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fastenPackaging & ShippingCompany Profile/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1