Oriented and Omnidirectional Full Frequency Band Uav Passive Detection Equipment

Product DescriptionThe UAV detection and direction finding integrated system adopts Cognitive Radio Protocol Cracking (CRPC) technology to solve the detection, identification, direction finding, and orientation of civilian UAVs. At the same time, the real-time position of the target UAV and the pilot is determined, and the flight trajectory of the UAV is tracked in real time. It can be used in aviation airports, prisons, important industrial facilities, national defense, public security areas, sports venues and major events.The cognitive radio protocol cracking technology is the fourth-generation UAV defense method. This technology uses an antenna array to monitor the radio environment in the defense area, and continuously collects radio signals in the defense area for 24 hours. The signal is transmitted to the signal processing unit to accurately demodulate and decode the UAV signal, and then the analyzed UAV signal is transmitted to the data server through the network, and the data server performs unified management of the received UAV signal to UAVs flying illegally and privately carry out interference countermeasures.Detailed PhotosProduct Parameters 1.1List of Supporting EquipmentItemSpecificationPassive DetectionDetection FrequencyRange: 70mHz to 6gHzMain bands 2.4G, 5.8GOptional bands: 2.4G, 5.8G, 433M, 900M, 1.4G, 5.2GDetection Range5km (target with DJI Mavic 2)Direction Finding Accuracy≤3°Hovering       ≤10°MovingNote: please deploy the equipment at outdoor environment, and connect the antennas with the radio processing unit according to the physical identification.  1.2 Product Function  ModuleDescriptionPassive detectionThe system only passively receives and does not emit any electromagnetic signals, and can detect the drone model and its electronic fingerprintDead Angle Free DetectionCan accurately determine the direction of the drone to indicate the targetAccurate recognitionCan accurately identify different drones of the same brand, model, and frequency bandDefense/Black & White ListThe black and white list can be marked with one click, and the black-flying drones can be attacked, and the white-listed drones will not be interfered.Full model librarySupports the full range of DJI, mainstream brands in the market and DIY drones, covering more than 98% of mainstream models in the market.1.3 Working Environment  ItemSpecificationOperating temperature-40ºC~+70ºCOperating HumidityW95%Atmospheric pressure86kPa to 106kPaRated voltage220V±22V AC50Hz±lHz/60Hz±lHzStable Characteristics   ItemSpecificationShell ProtectionIP65Continuously workingUnlimitedTechnical standardMeet the requirements specified in 5.10 of GJB 6724-2009          RF CharacteristicsContentsDataReceiving Sensitivity2.4G  ≤ -95dBm5.8G  ≤ -95dBmOthers ≤ -95dBmReceiving bands supports70MHz to 6000MHzDetection Airspace360° full rangeCommunication MeansFM,2FSK,4FSK,GFSK,MSK,BPSK,QPSK,16QAM,64QAM,OFDM,DSSS,FHSSAllowable radiant intensity of environmental electromagnetic waveGB8702-2014 Requirements of Electromagnetic Environment Control LimitsDetection modePanoramic scanning, Channel scanningWorking time24H*365D   Note: The above size is the shape size of the detection box under the closed state;      2. Device Erection and DeploymentSelect a wide-view field outdoors, and start to deploy and use the equipment. Before using the equipment, first check the specifications and quantity of standard parts according to the equipment list points, and then assemble them according to the installation steps below.  2.1 Operation EnvironmentSelect a suitable site outdoors and deploy the equipment for use. Usually selected in the outdoor open highland or the top of the building, pay attention to whether there is obvious shielding and the building with strong interference equipment.  2.2 Antenna ConnectionThe receiving frequency band antenna is screwed to the radio processing unit in a clockwise direction one by one according to the corresponding interface identified on the antenna and the radio processing unit. The antenna in the same frequency band can be used, and the detection antenna in different frequency bands cannot be used.Note: When connecting the antenna, connect the antenna and radio processing unit according to the interface identification, otherwise the damage will be caused to the radio processing unit after the system is turned on.  2.3 Power and internet connection(1) Network access:The radio processing unit can be connected to the host terminal through TCP / IP interface using optical fiber or standard network cable; or link the device to the wireless network or 4G network  Company ProfileOur company offers a wide range of advanced anti-UAV products for early detection, identification and tracking of UAVs, assessment of level of threat and adequate response actions including drone counteraction and neutralization. Counter-UAV products supplied by our company can be used separately or as part of complex integrated Anti-UAV defence system