1kw VHF Four-Dipole Television Transmission Antenna CH6-CH12

Product technical dataProduct name:VHF four-dipole television transmission antennaEquipment model:ZRVHF-4OEquipment origin:Jiangsu   Manufacturer:Confucianism Nanjing Radio and Television Equipment Co., LtdOne. Product function introductionThe four-dipole plate antenna is a wide-band television transmission antenna, which can work in the entire TV H l band, namely, 6~12 TV channels (frequency 167~225MHz). It has high power gain, convenient impedance adjustment and good standing wave ratio. The structure is relatively simple and convenient for processing and transportation. It can be conveniently installed on the side of various TV towers. By selecting an appropriate number of antenna dipole and its feeding method, it is convenient to Change the directionality of the transmitting antenna in the horizontal plane and vertical to meet the different service requirements of each radio station.All indicators of the antenna system comply with the standards of GY/T 5088-2013 Technical Indicators and Measurement Methods for Transmission Antenna Feeder System of TV and FM Broadcasting.Two. Technical parameters of antenna system1. Model: VHF four-dipole TV transmission antenna2. Frequency range: 6CH-12CH3.Polarization mode: horizontal polarization/vertical polarization4. Gain (dB): G ≥ 8-14.95. Standing wave ratio: S ≤ 1.106. Input interface (KF): IF45-50/L27-50/L29-507. Impedance: 50 Ω8. Weight: 42 (kg)9. Wind resistance (KM/H): 27010. Windshield area: 0.6 square meter11.Waterproof sealing material: 703 silicone+self-soluble waterproof mastic+PVC adhesive12. Fabrication materialsThe vibrator is made of stainless steel with a wall thickness of not less than 2.5mm, the inner conductor is silver-plated, and the connector is silver-plated inside and nickel plated outside. The reflecting plate is made of stainless steel13. Sealing treatmentThe whole set of antenna is subject to waterproof and anti-rust treatment. All interface parts are sealed with mastic, sealing ring, sealing silica gel, thermoplastic pipe, etc., and professional technicians are sent to the tower for sealing treatment.(1) Place vulcanized sealing ring in antenna connector(2) Inject waterproof thread sealant into antenna connector;(3) External waterproof self-adhesive tape;(4) Finally, the external heat shrinkable sleeve is used for heat shrinkage./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1