1310nm CATV Transmitter Internal Modulation Optic Fiber Transmitter

1310nm Directly Modulation Optic Fiber Transmitter  Characteristic:1. Dual Module RF drive, high efficiency laser pre-distortion adjustment 2. Full-automatically Optic Modulation Intensity (OMI) l, AGC&MGC control. AGC status, input range is 78dBuV~88dBuV, system index is the best MGC status, input range can be adjusted 75dBuV~90dBuV by the ATT on front panel 3. Front panel has 20 grade OMI status display(Modulation Depth)., intuitively adjust and display OMI normal (NOM), low( LOW) or high(HIGH) AGC status, RF is fixed, OMI is always at NOM status. MGC status, OMI can be at NOM status by adjusting ATT. 4. Dual power supply inside backup. Full-automatically switch One is working, the other as cool backup( suggested) Both are working at the same time, one as hot backup, If one is damaged, switch to the other full- automatically. Switch time ≤ 10us. 5. Full- automatically control of casing temperature, ensure long life of the laser Casing temperature is monitored and controlled by micro-processor. Display screen shows the actual operation temperature in time When casing temperature≥ 45, Two fans at the back panel will open automatically to cool it by constraint When casing temperature≤ 35, the transmitter will turn down automatically to ensure longer life of the fans. 6. Dual RF input port AM interface input 59 routes PAL-D(47-550MHz) Digital interface(-10dB) input digital video(550-750MHz) 7. Time locked function Fiber optic transmitter, with time control and lock function, user can set the working time ( eg, 3 months ) by the software on the Front panel. If exceeding the fixed time, there will be alarm, only the password can turn on the machine again otherwise it will Turn off automatically. Summary:It is important equipment to set up CATV HFC networks, and primarily used for TV video signal, digital TV signal, telephone voice Signal and data (or compressed data) signal long-distance fiber transmission. The product use import high performance DFB laser Transmitter as light source, RF drive adopts RF power digital automatic process technique and advanced RF pre-distortion circuit Developed by our company and built-in perfect microprocessor automatic monitor system insure the excellent function of the product. Test Condition:Test link path is formed of standard fiber and standard optical receiver. Under the condition of prescriptive link loss, Laser transmitter modulation depth of each channel being 3.6%, set 59 PAL-D simulative TV channels signal at 47~550MHz And 33 QAM64 digital modulated signal at the range of 550~750(862) MHz, output level of digital modulated signal is lower 6dB than of simulative signal carrier wave. Principle Drawing*Model nomination explanation please reference 1310nm laser transmitter equipment model nomination explanation. 6Accessories PerformanceIndexSupplementOptic featureLaser wavelength(λ)(nm)1310±10 Output power(dBm)4~24 Return loss(dB)≥60 Optic fiber connector FC/APCSC/APCRF featureWork bandwidth(MHz)45-862 Input level(dBmV)15~25AGCFlatness(dB)≤±0.7545~862MHzReturn loss(dB)>1645~750MHzInput impedance(Ω)75 Link featureTransmit channel PAL-D/60chNTSC/80chCNR(dB)≥5210Km optic fiber,0dBm receiveCTB(dB)≤-70 CSO(dB)≤-63 General featureNetwork interface port RJ45,R232Support I.E. & SNMPPower supply(V)90~265AC-48VDC optional(30~60VDC)Power Consume(W)≤50Single power worksWork temp.()-5~65Machine temp. control automaticallyStorage temp.()-40~85 Work relative temp.(%)5~95 Size(")19×14×1.75(W)x(D)x(H)FAQ 1. What are the payment terms that you support? Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment which is more convenient for you. 2. What about the lead time? Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends. 3. How about the shipping? When the package is small, we normally choose FedEx, DHL, TNT, and UPS and so on, while the goods have high weight and volume, we suggest using air or sea shipment. 4. How can I place an order? (1) Negotiation is agreed for the product price and specifications. (2) Proforma invoice will be sent for confirmation. (3) After the agreement on the proforma invoice, the customer makes the deposit. (4) Manufacturing will be started as soon as the payment is confirmed by our bank. (5) Ship out the goods within the agreed delivery deadline. 5. Can you do OEM for us? Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you. 6. How about the Warranty? There are 12 months for the warranty. While the warranty is not responsible for those broken by violence or updated with other brands.   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1