SFP-10g-T 30m Copper Compatible H3c RJ45 Connector Fiber Optical Transceiver Module

SFP-10g-T 30m copper Compatible H3c RJ45 Connector fiber opitcal transceiver module10GBASE-T Copper SFP+ TransceiverSFP+-10GBASE-TSFP+10G-T OverviewSFP10-T-C10 SFP+ 10GBASE-T is high performance and high speed copper transceiver module over Cat 6a/7 cable with a link of 30m, and it also supports 10/100/1000/2500/5000Base-T application. The benefit is that it uses standard-based technology with the familiar RJ45 connector and provides backward compatibility with legacy networks.Product Features• Supports 10GBase-T using 30m Cat 6a/7 Cable• Supports 5000Base-T using 50m Cat 5e cable or better• Supports 2500Base-T using 75m Cat 5e cable or better• Supports 10/100/1000Base-T using 100m Cat 5e cable or better• Compliant with IEEE 802.3az • Compliant with SFF-8431 and SFF-8432 MSA• Low Power Consumption (2.5W MAX @ 30m)• Auto-negotiates with other 10GBase-T PHYs• I2C 2-Wire Interface for Serial ID and PHY Register Access• Auto-sense MDI/MDIX• RoHS Compliant• Operating temperature range:0ºC to70ºCApplications:Gigabit Ethernet  Switch/Router to Switch/Router Link High speed I/O for file severs Description:SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset. Applications10 Gigabit Ethernet Ordering InformationPart NumberDescriptionSFP+10G-T10/100/1000/2500/5000/10GBase-T SFP+ Copper RJ-45 ConnectorFor More Information:SfpCodingBox (Dongguan) LimitedWeb: sztelefly.en.made-in-china.com General Specifications  ParameterSymbolMinTypMaxUnitRemarksData RateDR 10 Gb/s1Bit Error RateBER  10−12   Operating TemperatureTOP0 70ºC2Storage TemperatureTSTO−40 85ºC3Supply CurrentIS 700750mA4Input VoltageVCC3.143.33.46V Maximum VoltageVMAX  4V4Surge CurrentIsurge  30mA6Notes:1. IEEE 802.3ae 2. Case temperature 3. Ambient temperature 4. For electrical power interface 5. Referenced to GND 6.Hot Plug above steady state current Dimensions           ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED                                                         UNIT: mmElectrical Pad LayoutPin Assignment  PIN #Symbol DescriptionRemarks1VEETTransmitter ground (common with receiver ground)12TFAULT Transmitter Fault. Not supported 3TDISTransmitter Disable. PHY disabled on high or open24SDA2-wire Serial Interface Data Line35SCL2-wire Serial Interface Clock Line36MOD ABSModule Absent. Grounded within the module37RS0No Connection Required 8LOSLoss of Signal indication. Logic 0 indicates normal operation. 9RS1No Connection Required 10VEERReceiver ground (common with transmitter ground)111VEERReceiver ground (common with transmitter ground)112RD-Receiver Inverted DATA out. AC coupled 13RD+Receiver Non-inverted DATA out. AC coupled 14VEERReceiver ground (common with receiver ground)115VCCR Receiver power supply 16VCCTTransmitter power supply 17VEETTransmitter ground (common with receiver ground)118TD+Transmitter Non-Inverted DATA in. AC coupled 19TD-Transmitter Inverted DATA in. AC coupled 20VEETTransmitter ground (common with receiver ground)1Notes:1.Circuit ground is connected to chassis ground 2.Disabled: TDIS>2Vor open, Enabled: TDIS