High Precision Low Ripple Variable High Voltage DC Power Supply 4u Bench Rack Mount Chassis for Capacitor Charging

CCP Series High voltage DC Power SupplyPower range: 500W ~ 2KWVoltage range: 5KV ~ 60KVCurrent range: 10mA ~ 400mA4U / 19-inch standard chassisPrecise voltage and current setting and measurement capabilitiesOCP, short circuit and load discharging protections etc.  OverviewThe CCP series is high-voltage power supply specially designed for high-voltage capacitors charging application.The unique constant-current working charging mode and reverse-cutting design & protections of this series of power supply best match the requirements of capacitor charging requirements.CCP series has two configurations according to the output power: 4U chassis and 6U chassisThe 4U chassis models can achieve a maximum output power of 2KW and a maximum output voltage of 60KV.The 6U chassis model can achieve a maximum output power of 6KW and a maximum output voltage of 100KV.This series can meet the charging and testing needs of various capacitors.It is a best choice for HV laboratory testing, product testing and other HV applications.FeaturesCan be used as a HV DC power supply or as HV capacitor charging power supply.Output voltage adjustable from 0 to 100%Output power: Average charging @ 2KJ/S and the peak charging power can reach 3KW.Charging in constant current mode and switch to constant current mode till fully charged.Unique double isolated system, strong anti-interference ability.Forced air cooling, very rugged design.Optional functions0 ~ 10V analog signal control (DB9 / DB15 interface ) (+AC)RS communication interface (RS232 / RS485 optional) (+RC)SpecificationsInputVoltageSingle-phase 220V±10% (input tolerance: 10%)Frequency50Hz/60HzCurrentAs per output power.OutputRated power500W ~ 2KW (Max.) available **Output voltage adjusting range5KV/10KV/20KV/30KV/40KV/50KV60KV available **(For other output voltages, please contact us for details)Output current adjusting range0A ~ ***mAOutput polarityPositive or Negative (both available)Client must choose one output polarity before ordering.Line regulation≤0.5% for no load to full load at output.Load regulation≤0.5% for ±10% change in input voltage.Ripple (Vr.m.s.)≤0.5%@ rated output.Output connectionHV connector and line provided by IdealTek.Efficiency≥85%Setting & DisplayOutput control mode10-turn potentiometer on front panel.Display mode41/2 LED digital displayProtection & Monitoring functionsLoad discharging protectionWhen the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.Short circuit protectionWhen a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.Over current protectionWhen the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.Noise≤55dBProtection degreeIP20Cooling methodForced air coolingWorking environment conditionsAmbient temperature10ºC~40ºCHumidity10%~90%(non-condensing)Height≤2000mStorage environment conditionsAmbient temperature-20ºC~60ºCHumidity10%~90%(non-condensing)Height≤4000mSize (W*H*D) (mm)19" sub-rack unit with 4U height and 600mm DepthNote: every power supply has 48 hours full load burn-in test @ 40ºCSafety cautionThis power module has HV output, only professional person could operate it.Please make sure of good grounding before operation.Capacitor charging power supply has low internal stored energy, please NO no-loading working.Keep power module clean and good ventilation.HV input & output connectors or HV load no touch anything.Standard model listKVmAP (KW)Model54002CCP-220VAC-(N/P)2KW-5KV102002CCP-220VAC-(N/P)2KW-10KV201002CCP-220VAC-(N/P)2KW-20KV30672CCP-220VAC-(N/P)2KW-30KV40502CCP-220VAC-(N/P)2KW-40KV50402CCP-220VAC-(N/P)2KW-50KV6033.32CCP-220VAC-(N/P)2KW-60KVMore models are coming soon.Drawings (for reference only)4U chassis (≤2KW) (RAL7035) Remote DB15 port drawing and definition1Reset/HV InhibitHigh electric level = Reset/HV InhibitLow electric level = start HV2 Spare 3 Spare 4 Power Supply Common Power Supply Ground5 kV Program Input 0-10Vdc = 0-100% rated output, Zin>10Mohm6 Spare 7 Spare 8 kV Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%9 +15Vdc Output +15Vdc @ 100mA, Max.10 mA Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%11 Power Supply Common Power Supply Ground12 Charge ends0V=end13 Power Supply Common Power Supply Ground14 Power Supply Common Power Supply Ground15 Power Supply Common Power Supply Ground/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1