Triac LED Driver 60W Constant Voltage Leading Edge or Trailing Edge Dimmable Driver

Product DescriptionMetal housing LED power supply for indoor use. Also known as industrial power supplies, these transformers are suitable for up to24 hours of use. Suitable for 12V or 24V led strip operation. It is important that the LED power supply is not overloaded, up to amaximum of 80-85% of the rated power. The power supply has a terminal block through which it can be connected to both the mainsand the LED strip.Traic dimmable & 0-10v dimmalbe Slim type, 30mm height ultra thin Attractive black color appearance  60W to 400W full power available High reliability   Specifications Product No. HL-12V100-TR HL-24V100-TR Output DC voltage 12V 24V Rated Current 8.3A 4.17A Current Range 0-8.3A 0-4.17A Rated Power 100W 100W Ripple and Noise(Max)Note.2 150mVp-p 240mVp-p Voltage adjustment 10.8-13.2V 22-27.6V Voltage Accuracy Note3 ±1% ±1% Linear Adjustment Note4 ±0.5% ±0.5% Load Adjustment Note5 ±0.5% ±0.5% Start and rise time   Hold time(Typ)   Input Voltage range   Frequency range   Efficiency(Typ) 80% 82% AC current (Typ)   Surge current (Typ)   Current leak   Protection Overload Larger than 105% of capacity restoration after abnormity removed Overvoltage       Overheat     Environment Working temp. -20~+60ºC(Refer to the tenuation curve) Working humidity 20~90% RH, without condense Storage temp & hmdty -40~+80ºC Temp. coefficient ±0.03%/ºC (0~50ºC) Vibration proof 10~500HZ,5G 10min / cycle,X,Y,Z axes 60 min each Safety reg. & EMC (Note.6) Safety regulation GB195110.1-2004/IEC61347-1:2003 CE(EMC+LVD) Voltage proof I/P-O/P:1.5KVAC insulation resistance I/P-O/P:100M Ohms/500VDC/25ºC/70% RH EMC irradiation EN 55015:2006;EN61000-3-2:1995+A2:2005 EMC disturbance proof EN 61000-3-2:2006;   Dimensions 230*50*30mm(L*W*H) Packing 0.31kg/PCS Notes: 1. Unless specially indicated, all data are taken under 230VAC input, rated load and 25ºC environment temp. 2.Ripple and noise: measured with a 12" double ripple cord connected in parallel with a 0.1μF and a 47 μF capacitor on 20MHz bandwidth. 3.Accuracy: including preset errors, linear adjustment rate and load adjustment rate. 4.Linear adjustment: taken under rated load from low voltage to high voltage. 5.Load adjustment: taken under 0~100% of rated load. 6. Power supply is taken as part of the whole system, and needs to be confirmed with terminal instruments for EMC. /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1