SMUN EDR-120-12 120W 12VDC 10A Din Rail Power Supply

  MODELEDR-120-12EDR-120-24EDR-120-48OUTPUTDC VOLTAGE12V24V48VRATED CURRENT10A5A2.5ACURRENT RANGE0 ~ 10A0 ~ 5A0 ~ 2.5ARATED POWER120W120W120WRIPPLE & NOISE (max.) Note.2100mVp-p120mVp-p150mVp-pVOLTAGE ADJ. RANGE12 ~ 14V24 ~ 28V48 ~ 55VVOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%LINE REGULATION±0.5%±0.5%±0.5%LOAD REGULATION±1.0%±1.0%±1.0%SETUP, RISE TIME1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full loadHOLD UP TIME (Typ.)16ms/230VAC 10ms/115VAC at full loadINPUTVOLTAGE RANGE Note.690 ~ 264VAC 127 ~ 370VDC[DC input operation possible by connecting AC/L(+), AC/N(-)]FREQUENCY RANGE47 ~ 63HzEFFICIENCY (Typ.)85%87.5%88.5%AC CURRENT (Typ.)2.25A/115VAC 1.3A/230VACINRUSH CURRENT (Typ.)20A/115VAC 35A/230VACLEAKAGE CURRENT100M Ohms / 500VDC / 25ºC/ 70% RHEMC EMISSIONCompliance to EN55032 (CISPR32) Class A, EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class AEMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020OTHERSMTBF474.6K hrs min. MIL-HDBK-217F (25ºC)DIMENSION40*125.2*113.5mm (W*H*D)PACKING0.6Kg; 20pcs/13Kg/1.16CUFTNOTEAll parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.Tolerance : includes set up tolerance, line regulation and load regulation.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.lnstallation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. ln case the adjacent device is a heat source, 15mm clearance is recommended.Derating may be needed under low input voltage. Please check the derating curve for more details.The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft}.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1