High Quality Uszgs12 Box-Type Distribution Transformer Substation

BRIEF DESCRIPTION OF THE SUBSTATION ZGS ENERGY STORAGE BOX-TYPE SUBSTATION - ZGS series new energy box-type substation is special equipment for grid output after increasing the voltage of wind power or photoelectric 0.315-1KV to 10KV or 35KV, which is a new product tailored for new energy power generation by our company to learn from the experience of new energy power generation in Europe and the United States, combined with the actual situation and status of domestic new energy power generation. Its emergence adapts to the trend of establishing new energy farms on a large scale across the country and is the best-supporting product for new energy power generation systems.The product adopts a frame structure, welded with steel or assembled from steel plates, the frame is covered with a special paint layer, with strong mechanical properties, weather resistance, and corrosion resistance preassembled (box-type) substation as a whole structure, the box is separated into three relatively independent small rooms that are high-voltage room transformer room and low greenhouse room lighting are automatically opened and closed with the door of the preassembled (box-type) There is a heat insulation layer at the top of the substation to prevent condensation caused by the rapid change of temperature in the box in the high temperature and competition area. In order to make the temperature in the box stable, the low-voltage room of the transformer room is equipped with an automatic temperature control device.THE STRUCTURE OF THE SUBSTATION - HIGH-VOLTAGE CHAMBER - Equipped with a high-voltage ring network cabinet, which has a perfect "five-proof" function. The high-voltage switch can choose a sulfur hexaoxide load switch and vacuum circuit breaker. The cabinet has a variety of protection functions such as transformer short circuit and overload.TRANSFORMER CHAMBER - Equipped with dry or oil-immersed transformers. The box is equipped with a perfect ventilation system, the temperature control value can be set according to needs, and the transformer is equipped with a live interval device to prevent accidental entry during observation.LOW-VOLTAGE CHAMBER -  Divided into two assembly forms: with corridor type and without corridor type. The indoor can be equipped with metering cabinet, mainline inlet cabinet, outlet cabinet, capacitor cabinet, and contact cabinet (when two transformers are used), with the overall function of low-voltage switchgear. The general measuring cabinet and the main switch are integrated, that is, the upper part of the cabinet is the instrument, the measuring box, and the middle and lower parts are automatic air switches, arresters, and sensors. The capacitor cabinet can be automatically compensated by manual or automatic control. The capacitor reactive power compensation capacity is generally 15-30% of the transformer capacity. FEATURES . Good sealing performance. The ZGS energy storage box-type substation has better sealing performance and good resistance tp wind, sand, slat spray, rain, and snow, which can withstand any cruel outdoor weather.2. Advanced electrospray technology. The shell of the ZGS energy storage box-type substation is not easy to rust and fade, 3. Strong adaptability to the environment. The shell is made of a variety of materials, selected according to different environments, strong environmental adaptability, beautiful shape, and harmonious appearance with wind scenes.4. Intelligent control. The ZGS energy storage box-type substation can be controlled remotely to accomplish natural ventilation of the four remote functions.5. The box-type substation is equipped with sufficient natural ventilation and thermal insulation measures to ensure the normal operation of the step-up transformer. CERTIFICATED & QUALIFIED The ZGS energy storage box-type substations have conformed to GB12173-2008, GB1094.11-2007, GB/T10228-2015, JB/T3955-2016, GB4208-2017, and other national standards and industry standards and also won the ISO-9001, ISO-45001, and ISO-14001 certificates.  CONDITION OF USE . Please install the substation in the place with an altitude≤ 2000m2. Maximum ambient temperature + 40ºC, minimum indoor ambient temperature -40ºC3. Humidity The daily average is not more than 95%, and the monthly average is not more than 90%4. Installed in a place without fire and explosion danger, serious pollution chemical corrosion, and violent vibration. DESIGN & MANUFACTURE PROCESS Based on more than 30 years of design, manufacturing, and experimental experience in the transformer industry, CEEG has developed a set of advanced three-dimensional + parametric design software, which can realize automatic design, cost optimization, and simulation.Fully considering the requirements of the national and industrial standards, ensuring the advantageous design of products.The high-voltage winding conductor is wound with a high-quality conductor and reinforced with long and short-cut glass fiber felt.