22kv Dry Type Power Transformer (SCB)

6kV up to 35kV Dry Type Transformer with Cast Epoxy Resin Dry Type Transformer Technical Data: Power-Cast transformers are available with specification as follows :  Rated Voltage HV coil : Up to 24kV  LVcoil : 0.48-4.16 KV*Power-Cast transformers with multiple high voltage connections can also be supplied. Tap RangeStandard : ±2.5%, ±5%  Other ratings are available by arrangement. Power Capacity Single phase : 20 - 2,000 KVA  Three phase : 50 - 10,000 KVAFrequency : 50Hz, 60Hz   Typical % impedance voltage : 4-8%. Connections HV coil : Delta  LVcoil : Wye with neutral point* Other connections are available to meet requirements. Temperature Ratings HV coil : Class F LVcoil : Class FMax. ambient temperature : 450 C   Temperature rise limitation : 1800 C   1. Rated capacity : 30~16000kVA2. Rated HV : 6kV to 35 kV3. Frequency : 50Hz or 60Hz4. Cooling methods : ONAN or ONAF5. Tapping Range : ±5%   ±2x2.5%   ±4x2.5%6. Regulator way : off-circuit-tap-changing or on-load-tap-changing7. Phase : Single Phase or Three Phases8. Connection Symbol : Yyn0 or Dyn11 or others9. The altitude of installation could not be over 1000m;environment temperature should be less than 4010. Coil temperature rise : 1000K11. Cooling methods : AN or AF12. Crust prevention class : IP00, IP20, IP2313. Insulation class : F class14. Insulation level:     10KV,power frequency withstand voltage 35KV,thunder impact voltage 75KV     20KV,power frequency withstand voltage 50KV,thunder impact voltage 125KV     35KV,power frequency withstand voltage 70KV,thunder impact voltage 170KV15. Product Standard : GB1094    GB6450     GB/T10228     DIN42523        IEC72616. Can run in 100% relative humidity or other harsh environment.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1