86mm NEMA34 Series 34HS11860 Step/Stepping/Stepper Motor and Driver CF2068m

Basic Info.Model NO.34HS11860/86STH118-6004+CF2068MApplicationPrinting EquipmentSpeedVariable SpeedNumber of StatorTwo-PhaseExcitation ModeHB-HybridFunctionControlNumber of Poles100TypeMagnetic-ElectricCertificationISO9001BrandThankAdaptive Drive MotorStepper Motor DriverAdaptive Drive ModelCF20522m ,CF20611m, CF2068, 860Application FieldServo Control SystemThe Applied Voltage220VAC, 110VAC, 48VDC,36VDC,24VDCTrademarkTHANKTransport PackageCarton or Wooden Box with Foam InsideSpecification86mm*86mm*L65-165mmOriginChinaHS Code8501310000Product DescriptionHYBRID STEPPING MOTOR  34HS  SERIESGeneral  Specifications: Step Angle ----------------------------------------------------------------------------------------------------------------1.8° (full step)Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)Ambient Temperature Range ----------------------------------------------------------------------------------------  -20ºC∽+50ºCInsulation Resistance ---------------------------------------------------------------------------------------  100MΩ Min. 500VDCDielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 MinuteInsulation Class ------------------------------------------------------------------------------------------------------------------ B class                      Silver Front Endbell                                              Black Front Endbell                                              Silver Front EndbellElectrical  Specifications:ModelLMotor Length(mm)HoldingTorque(N.cm)Min.RatedCurrent(A)PhaseResistance(Ω)PhaseInductance(mH)RotorInertia(g.cm²)LeadWireDetentTorque(N.cm)Max.MotorWeight(g)34HS65406524040.653.30.84101.934HS70607034060.41.71.04122.134HS80608045060.453.01.234152.334HS1006010072860.504.82.74203.334HS1186011887060.575.53.34303.734HS13060130100060.65.84.04354.034HS15060150120060.76.85.04455.5*Shown in the table is the representative product. It can be customized according to the requirements of users. Shaft:                                                                                                                   End:2-Phase Digital Stepping Motor DriverCF2068MOverview:CF2068M is a 2-phase hybrid stepping motor driver based on DSP control. It is a new generation of digital stepping motor drive which combines advanced DSP control chip and 2-phase inverter drive module. The drive's voltage is between AC20-80V, adapter current is below 6.0A and 86-110MM diameter of all kinds of 2-phase hybrid stepping motors. It uses a similar servo control circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than other hybrid stepping motors. Positioning accuracy is up to 51200 steps / turn. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high resolution, large and medium-sized CNC equipment.Key Features:High performance and low priceEquipped with 16 scales constant torque moment subdivision, the maximum resolution is 40,000 steps / turnThe maximum response frequency is up to 200KPPSWhen a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set currentOptical isolation signal input / outputDrive current 2.0A / phase to 6.0A / phase 8 scales adjustableSingle power input, voltage range: AC20~80V orDC24V~110VThe phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.)Current Setting:The operating current of the drive is set by the SW1-SW3 terminals, which switch for normal working output current (See the table below).Operating current Ir(A)2.02.573.143.714.284.865.436.0SW1ONOFFONOFFONOFFON OFFSW2ONONOFFOFFONONOFFOFFSW3ONONONONOFFOFFOFFOFFSubdivision Settings:The drive's subdivision is set by SW5-SW8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution)Subdivision400800160032006400128002560051200SW5ONOFF ONOFF ONOFF ONOFF SW6ONONOFF OFF ONONOFFOFFSW7ONONONONOFF OFF OFFOFFSW8ONONONONONONONONSubdivision10002000400050008000100002000040000SW5ONOFFON OFFON OFFON OFFSW6ONONOFFOFF ON ON OFFOFFSW7ONONONONOFFOFFOFFOFFSW8OFF OFFOFFOFFOFFOFFOFFOFFSW4ONFull CurrentOFFHalf CurrentDrive Wiring and Dimension Diagram:Input voltage cannot exceed AC 80V