Stablohm 750 Heating Resistance Wire for Drop-Bottom Furnace

Stablohm 750 Heating Resistance Wire For Drop-Bottom FurnaceProduct DescriptionA-1 large-sized cold-drawn wire products can be used for high-temperature resistance furnace. Practice has proved that: the product process is stable, integrated performance is good. Has good high temperature oxidation resistance and longer service life; excellent winding properties at room temperature processing, ease of processing molding; little rebound resilience and so on. Processing performance is very good; operating temperature can reach 1400 ºC.Main specifications and uses:Conventional Product specifications: 0.5 ~ 10 mmUses: mainly used in powder metallurgy furnace, diffusion furnace, radiant tube heater and all kinds of high-temperature furnace heating body.MAIN CHEMICAL ELEMENTS AND PROPERTIES Properties Grade         CrAl ReFe     25.06.0 SuitableBalanceMax Continuous Service Temperature(ºC) Diameter 1.0-3.0 Diameter large than 3.0, 1225-1350ºC  1400ºC        Resisivity 20ºC (ohm*mm2/m)   1.45  Density(g/cm3)    7.1 Approximate Melting Point( ºC)   1500  Elongation (%)    16-33 Repeatedly Bend Frequency(F/R) 20ºC   7-12 Continuous Service Time under 1350 ºC  More than 60 hours        Micrographic Structure   Ferrite The relationship between the maximum operating temperature and the furnace atmosphereFurnace Dry Air Humid Air hydrogen-argonArgonDecompositionatmosphere     gas   ammonia gasTemp(ºC) 1400 1200 1400 9501200User Manual  1. Rated Voltage: 220V/380V2. The installation process to avoid knocking, to avoid the damp, hand-held stove wire, they should wear gloves. Wire should be installed after the furnace has remained flat, and prevent surface scratches, dirt, corrosion, or improper installation, by affecting the life of3. In the rated voltage to use. In strong reducing atmosphere, acid atmosphere, an atmosphere of high humidity will affect the use of life;4. Temperature before use should be in dry non-corrosive atmosphere, about 1000 ºC spend a few hours, so that furnace wire protective film formed on the surface after normal use, so that can guarantee the normal life of furnace wire;5. Furnace installation should ensure that the insulated wire good power to avoid touching furnace after the wire, guard against electric shock or burns.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1