Compact electrospinning equipment used for electrospinning
nanofilament fibersNano Fiber Electrospinning
Unit Introduction:CYKY's (CY-NFES-040B
model) Electro-spinning equipment is a compact version for
Nano fiber Electro spinning.A unique support structure made of
steel pipes is provided along with the equipment which when screwed
and fixed together can be used as a sturdy support for the Nano
fiber electrospinning unit.Nano Fiber Electrospinning Unit Key
Features:Cabin Heating: Upto 45°C using 1000 watt coil
heaterThe chamber is provided with Residual Charge Discharge Stick
which is used for static removal.Safety switch provided to switch
off H.V. Power supply when door is opened.LED cabin lighting and
back light to view Needle tip and electro spin process.Exhaust fan
is provided for solvent vaporization. It is also used for cooling
down the equipment after spin process.Emergency stop is provided on
the control panel to stop the equipment where there is any
emergency.Coaxial spinneret: Our Nano fiber electrospinning unit
equips Coaxial spinneret which helps to produce Hollow nanofibers
and Core / Sheath nanofibers. This technology can also be used to
combine different characteristics of each polymer into one
fiber.Graduation scale provided on the granite surface in X & Y
direction which helps the end-user to achieve repetitive results by
marketing the positions of syringe pump and target.User friendly
software enables PC interfacing that helps the regulation and
control of various features like Rotating mandrel speed, Spin
Duration, Syringe pump flow rate, XY target movement etc.Rotating
Mandrel targets of varying diameters, Stationary target and
Reciprocating XY target provided with the system.System hood has
features like Exhaust fan, halogen lighting and transparent door
for monitoring electrospinning process.Built-in Arc Protection
CircuitNano Fiber Electrospinning
Unit Specifications:ItemDetailSpecificationsHigh Voltage Power
SupplyCYKY CY-NFES-040 comes with HMPSKV30 model high
voltage power supply. It has 0 - 30kV output voltage range with a
maximum current capacity of 0.5mA. Output voltage and current can
be set using front panel knobs and readout from the digital panel
meters.1.0 - 30kV Single Output, 0.5mA max Current2.Digital
Voltmeter and Current meter3.Static Removal Device - Shorting
Stick4. Constant current / Constant Voltage mode of
operation5.Built-in ARC Circuit ProtectionIndependently Controlled
Dual Channel Syringe PumpCYKY' S CY-SPLF4 model syringe
pump provides independent control of two dual channel syringe
pumps. The speed and flow rate can be changed on both to achieve
custom fabrications of fibers.The Syringe pump also can be moved to
and fro in X axis. The maximum travel distance is 200mm. The
movement is controlled via PC.It can operate with standard
off-the-shelf syringes made of plastic, glass or stainless steel.
The microprocessor based control circuit can render a flow rate of
0.4 µl/hr to 650 ml/hr (with 5ml Syringe). The syringe diameter,
spin duration or the target volume can be set by the user through
the ElectroSpinner software interface.1.To dispense from standard
disposable or glass syringes from 2.5 to 60ml2. Syringe holder made
of insulating material to work under high voltage conditions3.Motor
control through microcontroller to control and indicate flow
rate4.Four syringe dispensing system5.PC based control with
documentation of parameters like syringe diameter, flow rate, spray
duration etc.6.Manual height adjustment platform to vary the pump
height according to the target height.Rotating MandrelRotating
mandrels which comes with the electrospinning unit can be used as a
target to get an aligned continuous mesh of nanofiber. It has a
speed range of 300rpm to 4000rpm suitable for electrospinning.
Grounding of the mandrel to the HV power supply is attained through
a carbon brush contact. The rotating mandrel has a speed stability
of +/- 1%. CYKY's CY-RM-01 is a high speed rotating
mandrel assembly which works with CYKY CY-MN series mandrels
of 2mm to 100mm diameter and is of 200mm length. No. of mandrels
supplied are 100mm, 75mm, 50mm, 25mm, 15mm, 12mm, 6mm, 4mm,
2mm.1.Stainless steel drums of different sizes2.Rotational Speed :
300 - 4000 rpm3.Grounding facility :
Available4.Actuator:Microprocessor controlled BLDCmotor with hall
sensor feedback5.Speed stability : +/- 1%6.PC based control with
documentation of speed and duration Y Plate Collector &
Stationary TargetThis collector can be used as Stationary target or
as Y plate collector. The stationary target which acts as a
collector of electro spun nanofibers, is made of stainless steel
plate such that it can be held vertically on a table top. It also
has connector for grounding.Using a stationary target alone cannot
attain a uniform density of fibers, as most of the fiber is
collected around the point orthogonal to the syringe needle.
Combined with X movement provided on the syringe pump, the Y
translation st
Related products about Compact Electrospinning Equipment Used for Electrospinning Nanofilament Fibers
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup