Sdluxn Reinforcing Fibers for Concrete Wholesale Reinforced Polypropylene Crude Fiber China High Temperature Stability Curved PP Macro Fiber Suppliers

Sdluxn Reinforcing Fibers For Concrete Wholesale Reinforced Polypropylene Crude Fiber China High Temperature Stability Curved Pp Macro Fiber SuppliersProduct DescriptionPolypropylene Plastic-Steel Fiber Is Made Of 100% Modified Polypropylene Through A Special Process. There Are Three Product Forms: Slub Shape, Wave Shape, And Twill Shape. It Is Specially Used For Roads, Railways, Tunnels, And Culverts. Concrete Reinforcement Fibers. Its Biggest Feature Is A Low Rebound Rate, No Harm To People, And The Cup Will Not Fall Off After Being Sprayed With Rust. Reduce Construction Difficulty And Drop Waste Of Concrete, And Can Replace Steel Fiber For Crack Resistance Reinforcement Of Cement Concrete. The Density Of Plastic Steel Fiber Is 0.9 And That Of Steel Fiber Is 7.8. Under The Same Addition Ratio, Only One-Eighth Of The Weight Of Steel Fiber Needs To Be Added, Which Greatly Saves The Cost Of Use.Application Field1. Concrete For Highways, Bridges, Tunnels, Culverts, Airport Runways, Etc.2. Chemical Plants With High Requirements For Alkali Resistance And Chemical Corrosion.3. Seawall Dams, Basements And Underground Projects With High Requirements.4. Industrial Floors And Civil Buildings.5. Special Precast Concrete Products.Additional InformationRecommended Dosage: 4-10KG/M3, The Specific Dosage Depends On The Actual Application Project.Length Selection: In General Engineering, The Length Of Plastic Steel Reinforcement Fiber Is Preferably 25-60MM.Proportion Design: Usually, In The Square Concrete, It Is Advisable To Add 5-6Kg Of Plastic-Steel Reinforcement, And Double The Amount Of The Bridge Deck Waterproof Layer. It Is Not Necessary To Change The Amount Of Other Materials Used.Stirring Method: Since The Plastic-Steel Reinforcement Has Good Dispersion, There Is No Need To Add Other Stirring Conditions, And The Traditional Stirring Method Can Be Used. Or Choose A Double-Shaft Horizontal Forced Mixer.Precautions:After Adding Fibers, The Viscosity Of The Concrete Mixture Increases, And The Road Roller Should Be Rolled 2-3 Times More Than Ordinary Mixtures. Or Extend The Vibration Time For About 30 Seconds As Appropriate, And Then Plaster The Surface After The Concrete Surface Is Slightly Passivated To Avoid Bringing Out Fibers. The Maintenance Should Still Be Carried Out According To The Requirements Of Ordinary Concrete.Detailed Photos Application Field1. Concrete For Highways, Bridges, Tunnels, Culverts, Airport Runways, Etc.2. Chemical Plants With High Requirements For Alkali Resistance And Chemical Corrosion.3. Seawall Dams, Basements And Underground Projects With High Requirements.4. Industrial Floors And Civil Buildings.5. Special Precast Concrete Products.Product ParametersPp Crude FiberPolypropylene plastic-steel fiber is made of 100% modified polypropylene through a special process. There are three product forms: slub shape, wave shape, and twill shape.Name: Polypropylene Crude FiberBrand: LUXIANRaw Material: Modified PolypropyleneColor: WhiteLength: Support CustomizationApplication: It is a concrete reinforcing fiber specially used for roads, railways, tunnels, and culverts. Product NameModelMaterialsShapeDensityMelting PointEquivalent DiameterTensile StrengthElastic ModulusElongation at BreakLength(mm)Polyethylene crude fiberLXBFModified polypropyleneTwill/Bamboo shape/wavy0.91g/cm3160-1700.6-1.0um>400MPa>5.0gpa15-30%30/40/50/Custom LengthShandong Sdluxn Building Materials Technology Co., LtdAdd: Dong Jie Jia Zhuang, Laishan District, Yantai, Shandong, China.Shandong Sdluxn Building Materials Technology Co., Ltd. is located in Yantai Economic Development Zone, a beautiful coastal city in Shandong. The main products are more than 30 kinds of chemical fiber products such as polypropylene fiber, polypropylene mesh fiber, polypropylene nitrile fiber, polycarbonate fiber, carbon fiber, glass fiber, wood fiber, polypropylene fiber, polyester fiber, polypropylene nitrile, basalt, etc. It is a chemical fiber product enterprise integrating research and development, production, and sales.FAQQ: Are you a trading company or a manufacturer?A: We are a manufacturer, not a trading company. The factory is located in Yantai, Shandong ProvinceQ: How long is your lead time?A: The normal lead time is 5-10 days. It is according to the quantity and inquiries of us before placing any ordersQ: Do you provide free samples? Are the samples free of charge or need to be paid for?A: Yes, Free samples of 0.5-1 kg for each type are available for our customers. The samples are free but the freight is collected.Q: What are the terms of payment?A: Full payment is needed in advance before shipment.Q: How about your research ability? Do you offer technical support services?A: We have our own research labs and testing labs. Many universities and institutes have built long-term strategic partnerships with us. We offer technical support services for our customers.Q: Do you accept customized orders?A: Yes, we take customized orders. Please in