25kv /24kv 250A Loadbreak Elbow Connector

Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector.Features:l Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.l Built-in capacitive test point to determine the circuit status or install a fault indicator.l No minimum phase clearance requirements.l Mounting can be vertical, horizontal, or any angle in between. Application:l For connection of polymeric cable to transformers, switchgear, motors and other equipment with a pre-molded separable connector.l For indoor and outdoor installations.l System voltage up to 24 kV.l Continuous current 250 A (300 A overload for 8 hours).l Cable particulars:-Polymeric cable (XLPE, EPR, etc.)- Copper or aluminum conductors-Semiconducting or metallic screens- Conductor size 25-120 mm² Parameters:Ratings Overview:(Um) Maximum system voltage:25kVImpulse withstand voltage:125kVAC withstand voltage ,5min:54kVContinuous operating current:250AOverload (8 hrs. Max.) :300AShort circuit withstand:12.5kA/1sREMARK: All the data based on the standards IEC, Not the limited.Product Structure1,Conducting Rod: Tin-plated copper pin screws into the conductor contact with the supplied hex key.2,SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.3,Insulation: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality.4,Pulling Eye: Encapsulated stainless steel pulling eye with a decent to position the bail.5,Capacitive Test Point: Capacitive test point provides means to check circuit status. Molded EPDM conducting rubber cap provides a watertight seal.6,Stress Relief: The configuration of the outer shielded and the cable adapter provide cable stress relief.7,Cable Adapter: The sized opening provides and interface fit to maintain a watertight seal.8,Grounding Eye: Molded into the external screen for connection of an earth wire.9,SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential.10,Conductor Cable lug: Inertia welded bimetallic compression connector accepts copper or aluminum conductors.DescriptionReference No.Conductor Crosssection (mm²)Stretch Range Overinsulation (mm)25kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-252416.3-19.925kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-353516.3-19.925kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-505016.3-19.925kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-707019.8-23.525kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-959523.1-27.125kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-12012023.1-27 .125kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-353523.1-27 .125kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-505023.1-27.125kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-707023.6-26.425kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-959523.6-26.425kv/24kV 250A Load break Elbow ConnectorAH ZT-10/250-12012027.9-33.5/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1