Bluetooth 4.2 MP3 LCD Display Module Decoder Board Audio Receiver
APE FLAC WMA WAV Decoding Voice Recorder USB 32G Support
FM 1. LCD display: It can display the song name of
Chinese and English songs. You can copy the song and the
corresponding lyrics file into the U disk at the same time to
display the lyrics of the played song simultaneously.
2. USB/SD mode: short press to play pause button / FM
radio mode: short press to automatically search. 3. BT
/ USB / SD mode: short press for the previous song, long press
for the volume minus. / Fm radio mode: short press for the previous
one, long press for the volume minus. / AUX mode: long press volume
minus . 4. USB / SD mode: short press +10
function. 5. BT / USB / SD mode: short press for
the next song, long press for the volume plus / Fm radio mode:
short press for the next, long press for the volume plus / AUX
mode: long press the volume plus 6. REC recording
button: Press and hold this button during USB/SD operation to
record the sound of the MIC port. The length of the recording
depends on the capacity of the U disk or SD card used. Play the
music U disk with the recording file. Short press this button to
quickly cut to the recording file to play, so that users can
quickly find the recording file. (In AUX, USB/SD, FM work, if any
device such as U disk and SD is plugged in, press and hold the REC
button for 2 seconds to start recording. Short press the REC button
during the recording to end the recording and play back the
recorded content. If you are listening to music in U/SD, you can
quickly press the record button to quickly switch to the recording
file. If you want to listen to the current recording file, you can
press and hold the MODE button for 2 seconds to play the recording
file. REC recording file, please be sure to confirm the content you
want to delete.) 7. USB/SD boot defaults to full loop
playback. Press this button to switch to single loop playback.
8. MODE button: Short press to switch between
AUX/USB/SD/BT/FM mode./When playing the recording file, press this
button to delete the currently playing recording file.
9. EQ button: Short press this button to switch between 5
EQ sound effects when playing USB/SD music.
10. Infrared receiver. 11. U disk socket, support
dual lossless format decoding APE, FLAC, WMA, WAV, MP3 and so on.
12. SD card socket, support dual lossless format
decoding APE, FLAC, WMA, WAV, MP3 and so on.
13. Bluetooth Name: Bluetooth 14. Support 32G
memory card 15. DC 5V power supply direction can
not be reversed, wrong connection will burn the board
Feature: 1. Digital ground and analog ground wire: (When the
independent transformer winding is powered, the ground wire is
connected.), (The ground wire is separated when the battery box is
applied.). 2. The motherboard power interface
5V, recommend to use DC5V 1A(note that the positive and
negative poles are not connected). 3. Left and right
channel audio output. 4. AUX1 external signal input.
5. AUX2 external signal input. 6. 12V battery power
display interface: (detection voltage is lower than 5.8V
battery symbol is not bright, 5.8V-9.5V first grid flash,
9.5V-10.5V one grid is always bright, 10.5V-11.5V two grids are
always on, 11.5V or above three grid display means full power, note
that the current design maximum detection voltage should not exceed
22V); when the battery is lower than 8.5V, the machine is prompted
to charge the battery, but the battery is not used to protect the
battery. Below At 8.5V, the system automatically displays
Undervoltage and stops working. If the product is not applied to
this battery detection port, the system defaults to the working
state. 7. FM radio antenna interface. 8. MIC
recording port. 9. operating function buttons and remote
head interface. 10. Master volume encoder interface *
This is Audio Module , ask for extra amplifier . there would
no sound if directly to speaker . connect Amplifier First . *
Advice DC5V 1A adpator .Never Reversed positive and
negative , donn't directly to Vechile or Car's Battery
, it would burn this moudel at once . use a voltage regualtor
or stable module before to car's battery . Make sure the supply
power is stable & Correct before power on
. Packing List :1pcs*MP3 Decoder Board1pcs*Remote
( without battery , please perpare by yourself )1Pcs*2PIN
CABLE1pcs*3PIN CABLE /* January 22, 2024 19:08:37
*/!function(){function s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Related products about Bluetooth 4.2 MP3 LCD Display Module Decoder Board Audio Receiver Ape Flac WMA Wav Decoding Voice Recorder USB 32g Support FM
-
Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
-
Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
-
Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
-
Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
-
G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
-
New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
-
China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
-
Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup