30dBm 85dB Repeater 3G 4G Lte GSM 900MHz Dcs 1800MHz WCDMA 2100 FDD2600 Utms Band Selective & Industrial Signal Booster with Remote Monitor and Control

30dBm 85dB Band Selective & Industrial signal booster with remote monitor and control repeaterBand selective & industrial repeater introductionBand selective & industrial repeater are designed to use for specific operator or the user who have stringent requirements on out of band rejection and bandwidth and flatness and monitor of repeater,it has below characteristic:FeaturesUse the IF SAW filters ,the out of band rejection is very good and comply with ETSI,3GPP and 3GPP2 standards. The gain flatness≤3db if bandwidth 25Mhz.It can be local and remote monitored and controlled by our own software which is based on SQL data and server. local monitored and controlled by PC USB and remote monitored and controlled by SMS,GPRS or Ethernet. More parameters can be monitor by software,such as DL PA temperature, Input power, DL output power, DL actual Gain,DL VSWR, AGC Value, UL output power, UL actual gain and monitor Battery Voltage etc. It also have many alarms, such as power alarm, DL PA over temperature alarm,DL VSWR alarm and self-oscillation alarm etc. Also can set DL ATT ,UL ATT,PA power on/off by software.It has AGC function as below: 1) Automatically detect the isolation between donor antenna and service antennas,will automatically reduce the gain to avoid device self-oscillations. 2)Automatically detect output power,will automatically reduce the gain when the output power is too large.It has over temperature protection, it will off when temperature over 65ºC and will automatically open when temperature reduce to 15-50ºC.Limite the output power available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.It has power light(WP,GP) and alarm light(WI,GI) for self-oscillations,the power light will display as below,for example 30dbm repeater:  1) power light always on when output power≥27dbm 2)Power light on for a longer time then off for a while when 20dbm≤output power