Wireless RF 433MHz Gate Garage Door Lock Opener Smart Home Remote Control

Features:Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage.This is not a complete list! If your remote uses the 433MHZ frequency it will work with the remote duplicator (note: rolling code remotes will not work).IC model of original remote control is 2262 2260 1527 2240 and compatible IC.The battery used in the product is 27A 12V please replace the battery when the remote control distance is insufficient.Clone up to 4 remote signals from 4 different remotes.Transmission Speed:50-60KHZWorking voltage:DC9VWorking current:=10mWFrenquency Windage:±0.2MHzTransmission distance:100 meters(Open space)Oscillation resistance:According to customer's requestChip and Operating mode:1527, 2240, HT6720B, HT6P20D, COPY, ETC       Descriptions:With this remote control, you can control all 433MHz fixed code key fobs.Some remotes that use this frequency are listed below.4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc.This is a fixed frequency remote cloner (433mhz) for copying common fixed and learning code remote controls.Specifications:Package Weight: 33gSize:  61*29*12mmColor: BlackOperating frequency: 433MHzPowered by 27A 12V battery (included)Channel: 4Distance: Up to 100 metersApplication: Duplicate Your Existing Remote ControllersApplication example 1: Vehicle central locking systemsApplication example 2: Garage doors access control systemApplication example 3: Electronic gates access control systemApplication example 4: Electrical appliances controlApplication example 5: Car sunroofs controlApplication example 6: Heating systems controlApplication example 7: Light SwitchPackage included:1 x Remote ControlScenarios used       1. Code clearing method:At the same time, press and hold the above two keys (e.g. a and b) to make the indicator light flash quickly for three times, onehand does not loosen, and the other hand repeatedly presses three times to make the indicator light flash and release. When youpress the key again, the indicator light will not light up, indicating that the data is cleared successfully.  2. Copy method:After code clearing, put the copy remote control together with the original remote control, press and hold the two keys to becopied (e.g. a -) at the same time, and let go after the indicator light of the copy remote control starts to flash, indicating that the copy is successful, and copy other keys in turn as required. (Note: the copy remote control should be as close as possible to the original remote control to improve the copy accuracy. When you press the key again after the copy is successful, the indicator light is always on, indicating that the copy is successful.)      3. Recovery method:When you accidentally clear the data in the copy remote control, you can press the twobuttons at the bottom of the copy remote control at the same time, and the indicator light will flash quickly for about 2 seconds.After you let go, press any button, and the indicator light is always on, indicating that the previous data has been recovered. Besure to clear the original data in the copy remote control before copying other remote controls.NOTE:This product can copy the remote control with the following chip inside: PT2264, PT2262, PT2260, PT2240, SC2262, SC2260, EV1527,SCT527, HS1527, HS2240, SCL1527, FP1527. If you fail in copying with proper operation, you might have to check whether your device has a chip above.If IC chips can not match, it will not be copied, please verify the chip model before you buy./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1